Search results

  1. scrap--metal

    Best Gasket Sealer

    In my experience, rear end covers are pretty easy to seal. Just about any RTV/gasket sealer should work as long as the diff isn't filled to soon after assembly. No gasket necessary. If you're eager to dump fluid in it immediately after sticking the cover on, use whatever sets up the quickest.
  2. scrap--metal

    Water pump questions

    SBC's used both "long" and "short" water pumps. The casting is different between the two styles, which puts the drive pully on a different plane relative to the mounting surface on the engine block. Confirm whether your leaking pump is a "short" or a "long", and buy the same style replacement...
  3. scrap--metal

    14 bolt brake drum question

    Thank you for the pictures, and the links. I have a better understanding of how the drums and hubs go together now. A picture's worth 1000 words... I believe my hubs/drums look like @sickchev example pictures above. With that being said, could it be possible to swap the hubs from my 11"...
  4. scrap--metal

    Ford Trash Talk Thread lol

    Sorry, but this is the wrong thread for that nonsense!
  5. scrap--metal

    14 bolt brake drum question

    I'm pretty sure I have the smaller 11" brake drums. See the picture below; wheels are 16" for reference. I'm guessing my ability to use the 13" set up that's for sale, including backing plates, depends on whether my drums sit in front of or behind the hubs. Does that sound correct? The...
  6. scrap--metal

    14 bolt brake drum question

    Thanks for the info! I'll have to look things over more closely on my truck. I haven't taken the rear wheels off this one since I bought it, so I have some learning to do. I've been in many 10 bolts, but the 14's are still new to me.
  7. scrap--metal

    14 bolt brake drum question

    Thanks for the feedback guys. My K20 is not used for towing, just hauling stuff and hunting, so I'm not too concerned about heat dissipation in the rear drums. I agree that powder coating will reduce the ability to cool the drums to some extent, but it's not like we're talking about an...
  8. scrap--metal

    14 bolt brake drum question

    Do these look like the 11" or 13" drums? The guys says they came off of a '76 3/4 ton single wheel 14 bolt rear end with 9,300 original miles. It got a disc brake upgrade, so he's unloading these parts. If they're the correct diameter for my truck, what would be a fair offer? They are...
  9. scrap--metal

    Brush Guard, watchu tink?

    Usually my old Chevys do pretty good clearing traffic. It'll be interesting to see if the brush guard on the K20 helps even more. It's a real shame riding/driving with my wife in her Civic. That poor car gets no respect in the fast lane.
  10. scrap--metal

    Brush Guard, watchu tink?

    I should post a little more info for anyone still following along, or maybe someone in the future. Some lessons learned, if you will... First, the outer front bumper brackets will not mount to the frame with the bumper installed. My truck was missing the outer brackets when I bought it, but I...
  11. scrap--metal

    First square body and I'm using it as a daily driver shop truck. Wisconsin

    @squarebodyScotty What's wrong with your truck and why are you listing it on Marketplace??? I wasn't expecting to see that pretty truck come back on the market so quickly :( Hopefully we can talk you through whatever ails it, and you can remain a Square owner well into the future.
  12. scrap--metal

    C20 to K20 conversion questions

    I remembered your conversion and looked up that thread to confirm it was you. Did you replace the modified 2wd frame under your dually with a 4x4 frame like you planned? @kmc_hauls, take @Raybob9289 first hand advice. Or plan for a lift to build some clearance between the engine crossmember...
  13. scrap--metal

    Brush Guard, watchu tink?

    I got the brush guard mounted over the winter, and finally got the truck outside for a picture. It was certainly worth the modest investment.
  14. scrap--metal

    Rear brakes are giving me fits.

    ^ You might be on the right track there. If the bleeder screws are tight in the wheel cylinders, and the wheel cylinders are at maximum expansion, the drums may not fit over the shoes even if the parts are otherwise installed correctly. In other words, try cracking the bleeders on the wheel...
  15. scrap--metal

    '83 305 No more ESC, but now it is dieseling

    ESC is electronic spark control. It's a system designed to retard timing if the engine detects knocking. Vehicles with ESC use a specific ESC ignition module in the distributor. I think it has 5 terminals instead of 4 like on typical HEI ignition modules. The system consists of more than the...
  16. scrap--metal

    Ticking/slapping noise

    The prominent "ticking" in your video sounds like an exhaust leak to most/all of us who've watched your video. Anyone who's owned a street car with headers has heard that sound before. If you've replaced a "section of exhaust", where was that section? I'm guessing it was after the y-pipe (the...
  17. scrap--metal

    New Pulley Installation on a new Power Steering Pump

    Yes, the pully installs flush with the end of the shaft. Here's the pump on my truck.
  18. scrap--metal

    Rear-end shot

    His whole carrier is exploded! It's going to take more than spider gears to get him back on the road. From his post #12:
  19. scrap--metal

    Help with sudden engine knocking and clanking

    You might be on to something with the cracked flex plate idea. I had a cracked flex plate once, and if I remember correctly the sound did change depending on how it was loaded (e.g. acceleration, coasting, idle, etc.). To me, it did sound almost like an engine knock. I'm not sure why it would...
  20. scrap--metal

    Temp reads 220 after warm up and regular driving, 6.2 Diesel

    Has it always done this since you bought the truck? There are different temp sending units that produce different resistances. I'd guess that it has the wrong sending unit in the engine. I know I've had to get different temp sending units to get my small block temperatures to read accurately...
  21. scrap--metal

    Brake Pedal Slow to return

    @Ken B Did your new master cylinder fix your brake issue?
  22. scrap--metal

    Lotsa nice squares on CL out here right now!

    I bought a transfer case from the seller of that truck, Joel, a few years ago. He's thinning his heard this year. I assume it's because prices are so crazy. He's already sold two similar trucks so far this year. All pieced together "Frankentrucks", but solid and needing paint. He told me in...
  23. scrap--metal

    Lotsa nice squares on CL out here right now!

    Like this one? I'm sure this running driving truck won't last long at $1500. I'd go look at it for myself if I had the space at home. https://minneapolis.craigslist.org/wsh/pts/d/red-wing-73-chevy-truck-k20/7606590491.html
  24. scrap--metal

    Changing from 16gal tank to 20gal tank.

    I think I understand... The 20 gallon tanks use a single L-shaped rubber hose to connect the fuel filler neck to the fuel tank. The 16 gallon tanks use two rubber hoses with an intermediate steel tube between them. That's the part you have pictured, and I looks like you cut the rubber hose...
  25. scrap--metal

    WTB Gun Rack

    I haven't shipped much of anything in the last few years, so I guess I'm out of the loop there. That Amazon one doesn't look to bad I guess. I'd suspect that your period correct rack is probably sturdier than anything I could purchase off of Amazon these days. I'll think about it a little...

Latest posts

Forum statistics

Threads
44,162
Posts
950,639
Members
36,275
Latest member
2manysquares2care
Top