Search results

  1. kenneth1669

    Should I replace?

    Hey I thought instead of making a new thread I would just ask here but. I’m in the process of putting stuff together and my rebuild kit didn’t come with the 2-3 accumulator piston seal. The little piston in the valve body. I think that’s the name of it. I can’t for the life of me find one. Do...
  2. kenneth1669

    Should I replace?

    Weird I’m not sure. The lip seals looked alright just old and not terribly dried out. The truck was sitting for about 15 years in a storage unit with that transfusion in it. The previous ownwr had the original 400 swapped for the 350. I have only out about 750 mile on it sense resurrecting it...
  3. kenneth1669

    Should I replace?

    The truck was sitting for 7 months at my grandparents house and it leaks a lot. Brought it home and forgot to check the fluid and burnt it up. That’s what I’m assuming at least. I went to check the fluid after it started having problems shifting and it smelled very burned and very black
  4. kenneth1669

    Should I replace?

    I burnt up my th350 and am in the process of rebuilding it with the help of YouTube. I forget what it’s called but it’s all burnt to a crisp and the clutches look like they have sat on a BBQ for a couple hours. Would I be able to clean this out or does it need replaced?
  5. kenneth1669

    Front brake issue

    Ya
  6. kenneth1669

    Front brake issue

    I was looking into the resovoir and it kinda looks like the hole is plugged?
  7. kenneth1669

    Front brake issue

    Almost all the brake stuff is under 1k miles. New calipers, pads, rotors, resurfaced drums and I think we most if not all of the little things in the drums.
  8. kenneth1669

    Front brake issue

    The calipers are brand new and under 1k miles. I bought a new caliper originally and put it on and it didn’t fix it so I returned it.
  9. kenneth1669

    Front brake issue

    I replaced the brake line and it’s still not retracting. I only bled the one side tho should I bleed both and see what happens?
  10. kenneth1669

    Front brake issue

    My front brakes mainly my front passenger side has been locking up. The passenger side can still spin but the caliper still is pushing on the rotor when letting off the brakes. The driver side I think it’s warped because turning it some spots on the rotor are harder to turn than other spots. I...
  11. kenneth1669

    Front brake issue

    Hey I know it’s been a long time since you posted this but I’m having a very similar problem just on the passenger side. Did all the new brake lines, master cylinder and prop valve fix it?
  12. kenneth1669

    Locked up brakes

    should it be pretty lose or have some stability?
  13. kenneth1669

    Locked up brakes

    My passenger side brake is sorta locked up. It still moves when I spin it but it’s not fully free. From what I have researched my problem could be a seized caliper, the proportioning valve is doing vlave stuff or the brake line is acting as a one way valve. So to fix all those I bought a new...
  14. kenneth1669

    Ticking/slapping noise

    Oh ok sweet. I’ll do that. Thanks for all the help from everyone
  15. kenneth1669

    Ticking/slapping noise

    What are you guys hearing that is the exhaust leak? I don’t really know what the exhaust leak sounds like. I just see black marks on my exhaust where it’s leaking
  16. kenneth1669

    Ticking/slapping noise

    Alright I’ll do that. Thank you
  17. kenneth1669

    Ticking/slapping noise

    Because I can hear two different ticking noises. Also when driving down the road you can hear the exhaust pipe ticking away
  18. kenneth1669

    Ticking/slapping noise

    Ya there is definitely an exhaust leak. I replaced a section of the exhaust because it was rusted out so there is a little bit of a ticking noise from taht but that’s a hole different tick. I’m not to sure how to fix that, I have tightened the crap out of it so I just deal with it
  19. kenneth1669

    Ticking/slapping noise

    I don’t think that last link works Here’s new one
  20. kenneth1669

    Ticking/slapping noise

    Sorry it took me a little longer to get taht video. I forgot I had a game and got home a little too late to post the video, but here’s the link.
  21. kenneth1669

    Ticking/slapping noise

    I’ll post a link after school
  22. kenneth1669

    Ticking/slapping noise

    Man I couldn’t tell you. If it helps they are factory
  23. kenneth1669

    Ticking/slapping noise

    I’ll try that
  24. kenneth1669

    Ticking/slapping noise

    I haven’t brought it up to temp yet and listened for it but Ik I can hear it right after starting
  25. kenneth1669

    Ticking/slapping noise

    I have a 77 k10 with a 400 in it and recently I have started to notice sorta of a ticking/slapping noise coming from the drivers side of the engine. I was doing some research and listening to youtube videos that kinda sounded like mine. I’m kinda worried it piston slap or one video was saying a...

Latest posts

Forum statistics

Threads
44,157
Posts
950,607
Members
36,273
Latest member
dannyphx
Top