Search results

  1. Radiohead

    2 post shop lift

    Your thread has me noodling the nuances of proper lift installation. As a lift user, I always thought it was laughable how 8 bolts keeps all that potential energy in check, and for the most part it does. My brain goes to a concrete submerged steel matrix that connects with the lift much like...
  2. Radiohead

    2 post shop lift

    Judging from the cover of the manual, you got the exact correct model lift. Have fun!
  3. Radiohead

    Changing gear ratios: opinions/suggestions wanted!!

    It is if you want to do 20 series things.
  4. Radiohead

    Big block running hot. Can’t figure out the issue

    I can't find the post now, but it could be a head gasket issue with a plugged passage. I'm looking... Here https://www.gmsquarebody.com/threads/mark-iv-454-engine-build.39178/post-824933
  5. Radiohead

    Big block running hot. Can’t figure out the issue

    If you run out of ideas, verify the accuracy of your instrumentation. To eliminate another outlier.
  6. Radiohead

    C20 - Trailering vs. Camper Special

    Found an example of the front camper mounts on the fenders. My fenders are pristine, which makes me wonder if they got changed at some point.
  7. Radiohead

    Hello from Oregon

    North Coast greetings! Sorry for being late
  8. Radiohead

    Intermittent Squealing at startup and acceleration

    Belts and hoses, belts and hoses, it's time to check your belts and hoses.
  9. Radiohead

    STEERING COLUMN

    An example of the lower bearing and it's holder not being properly spaced. I ended up tapping the shaft (and the bearing) towards the steering wheel to take up the gap (the shaft has a collapse feature that can get out of adjustment).
  10. Radiohead

    STEERING COLUMN

    Picture 1, that is a bearing that loves to get drier than a popcorn fart and make noise. It looks like its riding in its plastic housing good (no excess gap I can see) so it's probably the ball bearings part without lube. Number 67 on the blow ups. Might get lucky with some spray moly, I used...
  11. Radiohead

    STEERING COLUMN

    Tilt column has that added feature of having an extra place to get loose and become a general pain in the a$$. It's not uncommon for internal fasteners to work their way loose from all the heating/cooling cycles from the Mesozoic period forward. It will require a bit of effort to remedy, on the...
  12. Radiohead

    RockAuto- 4x4 front drive shaft, '81 K20 -Rock Auto

    OK, I guess a retraction is called for.
  13. Radiohead

    RockAuto- 4x4 front drive shaft, '81 K20 -Rock Auto

    Wow, looks like Dorman is stepping it up a bit.
  14. Radiohead

    Tailgate holes

    Must have been, mine has no such holes.
  15. Radiohead

    What have you done to your square lately??

    Found dad's old chevy hat today going through some things. I will put it out on the dash as well as use it as an avatar for a while. Miss ya pops
  16. Radiohead

    Front end noise

    Bearings done recently brings something to mind. Have you re-checked the bearing preload?
  17. Radiohead

    1979 c20 charcoal canister

    79 c20 california camper special, 454 and dual charcoal cans. For reference.
  18. Radiohead

    Identify wiring & 3 prone connector, located under driver side dash

    Not sure Bucket, I've only seen two wires as well. Maybe a polarity scheme?
  19. Radiohead

    Identify wiring & 3 prone connector, located under driver side dash

    Yup, Uniden CB power cord. Fits quite a few of the older models.
  20. Radiohead

    What have you done to your square lately??

    Just the nylon and not the whole filter housing? ;)
  21. Radiohead

    Car Hauler tips/tricks/ideas

    Oiling sounds like a treatment that is best performed with all the wood exposed, dry and clean. Then after assembly, a recoat should be enough to keep the 'internals' protected. But, if that's not an option, go the Binford way - more oil!
  22. Radiohead

    What is this gauge?

    I wonder what the option code for that is
  23. Radiohead

    C20 - Trailering vs. Camper Special

    OK bucket, i hadn't forgot. That's a good eye you have. Notice the hole poked in it for an emissions sniffer. It's just the tailpipe that's original. Which surprises me. But here's where it gets weird going forward. A glasspack Then a patched in piece of Y pipe Then on to the factory...

Latest posts

Forum statistics

Threads
44,162
Posts
950,636
Members
36,273
Latest member
dannyphx
Top