Search results

  1. TX87R10

    Bottom A/C compressor unthreaded holes vibrating

    The bolt is not a standard one it seems #13 in this picture. Haven't found a part number for it yet that checks out
  2. TX87R10

    Bottom A/C compressor unthreaded holes vibrating

    .
  3. TX87R10

    Bottom A/C compressor unthreaded holes vibrating

    I found the source of my vibration at idle and it's a missing bolt or smth in the bottom of the compressor. It seems like the hole extends all the way across the compressor to the bracket but there are no threads anywhere. I searched far and wide and I think there is a bolt of same sort with...
  4. TX87R10

    1987 Chevy k10 350 ac help!!!!

    Iirc Summit sold me this same part. I ended up returning it and fixing valve stem in the one I had.
  5. TX87R10

    Diagnosing A/C not recirculating on mac

    Just kidding I found it. Traced the vacuum line back and find it snipped at the tee
  6. TX87R10

    Diagnosing A/C not recirculating on mac

    I pulled the kick panel and tested and the blend door is not working of course, then I had the bright idea to test other modes and realized it's not going in to defrost or anything. Going to do some more research but figured I would share I. Case it's something obvious
  7. TX87R10

    What’s IT Worth? (Post all “what’s it worth threads here)

    Well I thought about putting my truck up on Marketplace for more than it's worth just to gauge the market and I've got a guy wanting to show up now with cash tomorrow so wanted to get some advice. Long story short we payed the wifes car off and I was thinking about getting something for road...
  8. TX87R10

    Diagnosing A/C not recirculating on mac

    Yeah definitely the sound is not happening. I couldn't figure out the best way to explain that lol. Will check there first thanks!
  9. TX87R10

    Diagnosing A/C not recirculating on mac

    Hey everything has been running good in my A/C until a few days ago the max setting no longer seems to recirculate air. Does anyone have a link to a good diagnosis thread here? I tried searching around but no luck yet. A/C blowing, it's cold, just feels like the door to recirculate is not...
  10. TX87R10

    1987 3500 HD on FB (not mine)

    It's pretty close in DFW so within an hour or so. If someone is for real interested I can reach out to the owner and go check it out but I'm just a shade trew mechanic so no promises I can see everything
  11. TX87R10

    1987 3500 HD on FB (not mine)

    If you want the link I can try to figure out how to share my ass got banned from marketplace for no reason so I can't share that I don't think
  12. TX87R10

    1987 3500 HD on FB (not mine)

    Seems like a decent deal. Figured I would share here not my truck
  13. TX87R10

    New coil springs too strong? Can't connect upper ball joint

    That is how I held it in place while jacking it up lol Its hard to believe how strong zip ties are sometimes. I bet that actually worked too.
  14. TX87R10

    New coil springs too strong? Can't connect upper ball joint

    I am a big sissy I guess. I saw a couple spring compressor videos where the springs shot out like a helicopter or like a bullet. I can't imagine losing a finger or hand of even worse to a mistake anyone could make easily.
  15. TX87R10

    New coil springs too strong? Can't connect upper ball joint

    By the way I got the spring to seat top and bottom pretty easily without a helper by zip tying the bottom of the spring in place and the top really close and then as soon as it started to pinch I gave it a couple soft hits with a rubber mallet and it seated. I watched a guy trying to use a...
  16. TX87R10

    New coil springs too strong? Can't connect upper ball joint

    I said it wrong the first time by the way I was hitting the bumper on the bottom of the UCA and thought the bushings were what was holding it back. You were 100% right they were not tightened to spec yet.
  17. TX87R10

    New coil springs too strong? Can't connect upper ball joint

    Desperate times call for desperate measures... Thanks everyone for help and ideas!!!! Got it
  18. TX87R10

    New coil springs too strong? Can't connect upper ball joint

    It's a brand new one and I was not able to by hand with the bushings being so fresh I guess... About a 5" gap
  19. TX87R10

    New coil springs too strong? Can't connect upper ball joint

    Yeah good call... The only chain I have is not rated for more than 1200lbs I don't think and hardware store is gonna be $90 for a chain rated to do it... Probably better to put the old spring back on and pay someone to change it with the right tools
  20. TX87R10

    New coil springs too strong? Can't connect upper ball joint

    Nice let me try that. We will see what this husky Jack is made of
  21. TX87R10

    New coil springs too strong? Can't connect upper ball joint

    I finally got my spring seated in the top pocket and the bottom on the LCA. I was so happy I started jacking my truck up, put the spindle back on, jacked it up more to connect the upper...... And then I realized the spring is so strong right now it's picking the truck up off of the...
  22. TX87R10

    Sheered upper control arm bolt

    Not gonna lie there is a midget on my shoulder telling me to shave the shims to fit because it's far cheaper and possibly more reliable than the 40 years old bolt in about to pay $100 for
  23. TX87R10

    Sheered upper control arm bolt

    The saga has entered hour 14 of rebuilding my front suspension on a whim...... Squarebody graveyard guy called me back late at night looks like I might be getting the right part in the morning if I play my cards right... Only problem is I have no way to get there to buy the part :rofl: let's...
  24. TX87R10

    Sheered upper control arm bolt

    Well fugg the replacement bolt has a slightly larger diameter than the stock one on the shoulder and the shims don't fit anyway.
  25. TX87R10

    Sheered upper control arm bolt

    I like the idea but the only bolts the local part stores have found are not 1/2" 20. I'm not sure how to get them to find the parts as OEM is discontinued they all say. The bolt is 1/2" 20 (fine thread) and 3" long, splined and then shouldered.. I have doing the shocks and all the bushings...

Latest posts

Forum statistics

Threads
44,157
Posts
950,596
Members
36,272
Latest member
armchair
Top