Search results
-
Wanna slam that 63-98 C10/C1500? Lets talk about it!
The React spindle I mentioned is for 88-98. It's a completely new design Travis had done from scratch. It's not available anywhere else an was desperately needed for those trucks. I believe he worked on it in conjunction with Baer for the brake kits he also offers for those trucks. His 63-87...- bluex
- Post #20
- Forum: Lowered & Street Systems
-
Wanna slam that 63-98 C10/C1500? Lets talk about it!
I hope you left the - off your camber numbers there. You want negative so it doesn't go so positive during aggressive corning. My dd charger has about -1.7* and while it does wear the inner more its not super bad but it is a completely different suspension setup compared to these trucks. I'd...- bluex
- Post #16
- Forum: Lowered & Street Systems
-
Sticky thread for lowering C10s?
It's the thought that counts!- bluex
- Post #48
- Forum: Lowered & Street Systems
-
Wanna slam that 63-98 C10/C1500? Lets talk about it!
Moog offers offset upper a-arm shafts that add 1* of camber iirc. I used them when I was still on stock arms to help avoid a huge stack of shims so I wouldn't worry about them falling out. I'm sure you probably don't want to go through the hassle of installing them now but if you wanted to they...- bluex
- Post #12
- Forum: Lowered & Street Systems
-
Sticky thread for lowering C10s?
For anyone waiting my thread is up now: https://www.gmsquarebody.com/threads/wanna-slam-that-63-98-c10-c1500-lets-talk-about-it.38131/ Enjoy! its a long read :doh2:- bluex
- Post #46
- Forum: Lowered & Street Systems
-
Wanna slam that 63-98 C10/C1500? Lets talk about it!
Hangers: As I’ve said, skip them at all costs. They just aren’t worth the hassle of installation unless you know for sure you never want to go lower. You can do these with the bed on but it sucks, the gas tank usually has to come out, the rivets suck to remove they are just overall a huge PIA...- bluex
- Post #7
- Forum: Lowered & Street Systems
-
Wanna slam that 63-98 C10/C1500? Lets talk about it!
C notch: On 73-87 trucks with a flip kit, you don’t necessarily need a notch. If you just plan to cruise around in the truck and won’t be hauling or towing much it will be ok without it. On large dips, bridge approaches or potholes it might hit the frame a bit but nothing major. You will have...- bluex
- Post #6
- Forum: Lowered & Street Systems
-
Wanna slam that 63-98 C10/C1500? Lets talk about it!
Alright on to the rear suspension Spoiler alert, the best thing you can do to get the best handling and ride out of your truck is to ditch the leaf springs ASAP! The 67-72 guys have us beat here as the trailing arm setup under most of those trucks is a great start for a truck that doesn’t want...- bluex
- Post #5
- Forum: Lowered & Street Systems
-
Wanna slam that 63-98 C10/C1500? Lets talk about it!
A-Arms: The 73-87 arms are pretty labor intensive to rebuild bushing wise. It’s a wash really if you want to do that or buy aftermarket arms if you are paying for the labor. I like the CPP tubular arms on a static drop truck for the value they provide. You get new Delrin bushings, new ball...- bluex
- Post #4
- Forum: Lowered & Street Systems
-
Wanna slam that 63-98 C10/C1500? Lets talk about it!
Alignment: Factory alignment specs leave a lot to be desired and if you can find a good shop that will work with you it can be better. These are the specs I ask them for, you might have to pay more but it will be worth it in the end. If you’re looking for a good, sporty driving truck then this...- bluex
- Post #3
- Forum: Lowered & Street Systems
-
Wanna slam that 63-98 C10/C1500? Lets talk about it!
Springs: So, there is a ton of debate about this as well. I’ve done or experienced pretty much all the options at one time or another. 1” drop springs are usually a waste of time, your factory springs are 40+ years old, with a ton of miles on them and are pretty worn out. Almost every truck...- bluex
- Post #2
- Forum: Lowered & Street Systems
-
Wanna slam that 63-98 C10/C1500? Lets talk about it!
Lowering your C10/C1500 (1963-1998) So, you want to lower your truck? Got questions about how/why/what to buy? Hopefully this will help with your decisions. I will try to address most of the common questions/issues and give you a good idea of what to look for and anything that will trip you up...- bluex
- Thread
- drop drop spindles dropped lower lowered slam slammed
- Replies: 65
- Forum: Lowered & Street Systems
-
-
Green Gas Monkey Wrecked Truck being rebuilt.
I agree completely, still think it needed some better parts but it looks to be in very capable hands an should be back to better than it was when it left GMG really. -
Finally. And we're off! Unicorn 4500 complete rebuild.
The 4500 in my dually grinds going into 3rd an 4th so I'll definitely be watching this one! I've been thinking about rebuilding it myself rather than dropping 2k on it.- bluex
- Post #3
- Forum: Transmission & Transfer Case
-
Engine too cold for sniper??
You can lower the temp setpoint for learn to enable. You could change it to 140 if you want.- bluex
- Post #15
- Forum: Tech Discussion
-
Green Gas Monkey Wrecked Truck being rebuilt.
It's at a different shop now. 74Auto got it back an took it somewhere else. Alex gave up his you tube channel about 2yrs ago now I believe. -
Green Gas Monkey Wrecked Truck being rebuilt.
Last one they have for now. Some paint prep am damage repair -
Green Gas Monkey Wrecked Truck being rebuilt.
Episode 2 air ride stuff, they had to replace everything except the bags. -
Green Gas Monkey Wrecked Truck being rebuilt.
Looks like someone is FINALLY finishing this thing.... Sounds like it was a mess an never actually "belonged" to Alex either.... Ugh that's the wrong hood for a 76 too. Funny that he talked about how bad the metal was. I'm not surprised at all. -
How much does your square body weigh?
My C10 is about 3800 usually after I empty at the scrap yard. That's usually with me probably 1/2 tank of fuel an my toolbox with probably 100lbs of junk in it lol. Edit: 78 C10 350 NV3500 on air ride- bluex
- Post #6
- Forum: Tech Discussion
-
window glass run/channels ?
Precision Replacement Products https://www.prp.com/ /end thread -
Cutting coils
2 makes the spring too short an it will fall out of the pocket when you jack up the truck. It can still be aligned but the guy won't like you very much lol. Your shocks should be fine. I run/recommend stock length KYBs even with a 3" drop spring.- bluex
- Post #15
- Forum: Lowered & Street Systems
-
Sticky thread for lowering C10s?
I'm not going to get in a debate over all this with you if that's what you're after. For what we are discussing in this thread (off the shelf parts that have been around over 40 yrs in some cases) these are not concerns people should have. You only need to worry about bump steer an Ackerman...- bluex
- Post #42
- Forum: Lowered & Street Systems
-
Sticky thread for lowering C10s?
It will work just fine. That style stud comes with a locking nut which is another reason I like using them. Just get them as tight as possible and use RED lcctite on the large nut holding the stud to the frame. Use Blue on the nut that secures the shock. I generally don't change the studs if...- bluex
- Post #41
- Forum: Lowered & Street Systems
