Ronno6
Full Access Member
- Joined
- May 14, 2018
- Posts
- 444
- Reaction score
- 128
- Location
- South Mississippi
- First Name
- Ron
- Truck Year
- 1984
- Truck Model
- C10
- Engine Size
- 355
1984 C-10 Scottsdale 350 currently with carb..
Gonna install Fitech TBI EFI.........IF:
Truck quit running,
I switched tanks (valve works, or...it did...)
It makes noise when the switch is activated.
The fuel quit flowing........from either tank.
I can draw on the supply line and all I get is air.......switch setting....
I had backfed the supply line with gas and can't see any leaks, bur I need to correct my procedure to
tell for sure......
I do suspect that,as it it the same for both tanks, the trouble is either between the pump and the valve, or the valve itself....
Any thoughts as to where to look ??
Gonna install Fitech TBI EFI.........IF:
Truck quit running,
I switched tanks (valve works, or...it did...)
It makes noise when the switch is activated.
The fuel quit flowing........from either tank.
I can draw on the supply line and all I get is air.......switch setting....
I had backfed the supply line with gas and can't see any leaks, bur I need to correct my procedure to
tell for sure......
I do suspect that,as it it the same for both tanks, the trouble is either between the pump and the valve, or the valve itself....
Any thoughts as to where to look ??
Last edited:
