Bench Seat Tracks

Stormhawk · Dec 14, 2024

so I’ve been prepping the cab on my 83’ K20 for new carpet and speaker wiring.
After pulling the bench seat and the remains of the old carpet and padding I was inspecting the underside of my seat and noticed that the driver side slider track is broken. The seat had never slid properly, so this was the issue. Does anybody carry a replacement track assembly?
Does anybody have a working track assembly they would sell me?

bucket · Dec 14, 2024

I wonder how the heck that even happened?

If you want to save a little money, the track could be disassembled and the broken rail welded back together.

Stormhawk · Dec 14, 2024

I’m going to take the whole thing apart tomorrow and see about doing exactly that. Worst case scenario I can cut a small piece of steel and fix it to the bottom of the track either with a couple spot welds or a couple self tappers.

vr1967 · Dec 14, 2024

I may have a set of tracks. Will look when I get home from work in the morning, if you are interested.

Stormhawk · Monday at 2:11 PM

Definitely. I was able to cobble the damaged track back together with a piece of scrap metal, but the entire assembly is bent slightly and should probably be replaced.

vr1967 · Monday at 7:23 PM

Finally put my hands on them. They are dirty from sitting in the shed

You must be registered for see images attach

Bench Seat Tracks

Stormhawk

Junior Member

Attachments

bucket

Super Moderator

Stormhawk

Junior Member

vr1967

Full Access Member

Stormhawk

Junior Member

vr1967

Full Access Member

Similar threads

Latest posts

Forum statistics