What new tools have you got lately?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ali_c20

Full Access Member
Joined
Sep 20, 2016
Posts
1,348
Reaction score
1,950
Location
Austria
First Name
Alexander
Truck Year
1974, 1979
Truck Model
C20, K5
Engine Size
350, 350
Got me a new welding inverter lowest pro level for mig, tig flux and stick welding.
New welding helmet with big full color display. Both made in Italy not China.
Bearing removal tool.
Electric ratched for my wife. Was at my local hardware store and got 30% discount.
Had to spend a bonus from my company before I waste it on useless stuff.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,601
Reaction score
9,120
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Got me a new welding inverter lowest pro level for mig, tig flux and stick welding.
New welding helmet with big full color display. Both made in Italy not China.
Bearing removal tool.
Electric ratched for my wife. Was at my local hardware store and got 30% discount.
Had to spend a bonus from my company before I waste it on useless stuff.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You got an electric ratchet for your wife? That's a helluva trade. Where can I get such a deal?
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,601
Reaction score
9,120
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
You must be registered for see images attach


Picked up a Makita 3/8 corded drill to add to the collection. It will replace the Skil I've had for decades (it's made in the USA so that should tell you it's pretty old.) Haven't used it yet, but I've already replaced the 8 foot- 18 awg cord the Makita came with by installing a 19 foot-16 awg cord. That will let me move around some before I have to go look for an extension cord.

Most guys will turn up their noses at corded tools, but I try to limit my financial exposure to batteries. I really like my Milwaukee M12 drill, it's my go-to choice, but I think of it as a short-term fling and not a long-term relationship. Long after all the current lithium tools are dead the corded stuff will still be ready to work.

The big drill on the lower left is a Millers Falls Dyno-Mite I got from my dad. It's 70-years-old and still works fine. Above that is a Milwaukee 1/2" hammer drill.
A little tip for you about cordless tools. I put cords on them. 12v cigarette lighter cords from junk 12v car vacuums,spotlights, etc. I have a 9.6v Snap on Impact I run on 12V, a 9.6 Bosch drill I run on 12V. , 9.6 on 12v works great, run them off the cigarette lighter,clip them to the car battery, or run them off a jumper box. I also have 18V stuff on cigarette lighter cords I run all the 18v stuff off of Ryobi batteries.I have a cigerette lighter socket I hook to the Ryobi battery. I use Ryobi batteries,because their lithium batteries are designed and built to be backwards compatible with nicads.No worries about damaging batteries,tools,or starting fires. I have pics,I've put them up before.You can pickup 12v and 18v brand name cordless stuff,free or close to it when the batteries are dead. I use to use 24v Kobalt batteries for my 18V power source,until I damaged some batteries. Kobalt batteries management doesn't work across the board on all NiCad stuff like Ryobi does.
 

Attachments

  • Screenshot_20241215_091923_Chrome.jpg
    Screenshot_20241215_091923_Chrome.jpg
    76.6 KB · Views: 15
  • Screenshot_20241215_091927_Chrome.jpg
    Screenshot_20241215_091927_Chrome.jpg
    88 KB · Views: 12
  • Screenshot_20241215_091930_Chrome.jpg
    Screenshot_20241215_091930_Chrome.jpg
    63.5 KB · Views: 15
  • Screenshot_20241215_091939_Chrome.jpg
    Screenshot_20241215_091939_Chrome.jpg
    109.2 KB · Views: 14
  • Screenshot_2024-12-15_075543.jpg
    Screenshot_2024-12-15_075543.jpg
    99.2 KB · Views: 7
Last edited:

Catbox

Full Access Member
Joined
Jul 12, 2018
Posts
4,473
Reaction score
16,797
Location
Just Outside of Portland Oregon
First Name
Peter
Truck Year
1979
Truck Model
C20 Silverado Camper Special
Engine Size
461
I picked both of these up yesterday at the local Goodwill bins store.
That is where they sell stuff by weight.
Electrical stuff is sold for $0.79 a pound and there is no way to test stuff before hand.

These are both Made In The USA and full on aluminum bodied.
They both turned and so I tossed them in the cart.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach


Got them home and then plugged them on in.
Sure enough, both work like champs still.
So for perhaps $3.95 or so a piece, I have useable cool vintage tools.
 

Frankenchevy

Proverbs 16:18
Joined
Jan 3, 2018
Posts
6,098
Reaction score
7,806
Location
USA
First Name
Jeremy
Truck Year
Square
Truck Model
CUCV
Engine Size
Small
A little tip for you about cordless tools. I put cords on them. 12v cigarette lighter cords from junk 12v car vacuums,spotlights, etc. I have a 9.6v Snap on Impact I run on 12V, a 9.6 Bosch drill I run on 12V. , 9.6 on 12v works great, run them off the cigarette lighter,clip them to the car battery, or run them off a jumper box. I also have 18V stuff on cigarette lighter cords I run all the 18v stuff off of Ryobi batteries.I have a cigerette lighter socket I hook to the Ryobi battery. I use Ryobi batteries,because their lithium batteries are designed and built to be backwards compatible with nicads.No worries about damaging batteries,tools,or starting fires. I have pics,I've put them up before.You can pickup 12v and 18v brand name cordless stuff,free or close to it when the batteries are dead. I use to use 24v Kobalt batteries for my 18V power source,until I damaged some batteries. Kobalt batteries management doesn't work across the board on all NiCad stuff like Ryobi does.
Have you ever experienced a fire from your lithium batteries? Maybe I’ve been lucky, but I still have 12 year old Makita Li-ion batteries that have survived commercial use, been dropped from ladders and generally ridden hard and put away wet.
 

Frankenchevy

Proverbs 16:18
Joined
Jan 3, 2018
Posts
6,098
Reaction score
7,806
Location
USA
First Name
Jeremy
Truck Year
Square
Truck Model
CUCV
Engine Size
Small
Stopped by Harbor Freight after work today to take advantage of the 40% any Icon product, got the 3/8" split beam torque wrench to try out, and used the 20% off any item on the set of gauges, will be used to diagnose the 904 trans in the Dart.
You must be registered for see images attach

You must be registered for see images attach
Dang it, I saw the icon coupon, but missed the 20% off any single item.

I want a scanner and I’ve had my eye on the icon t8. Still not sure which one I should get in the $400-800 range.
 

Frankenchevy

Proverbs 16:18
Joined
Jan 3, 2018
Posts
6,098
Reaction score
7,806
Location
USA
First Name
Jeremy
Truck Year
Square
Truck Model
CUCV
Engine Size
Small
Got me a new welding inverter lowest pro level for mig, tig flux and stick welding.
New welding helmet with big full color display. Both made in Italy not China.
Bearing removal tool.
Electric ratched for my wife. Was at my local hardware store and got 30% discount.
Had to spend a bonus from my company before I waste it on useless stuff.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
I was late to the electric ratchet game, but I really like mine.
 

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
2,613
Reaction score
6,886
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
Dang it, I saw the icon coupon, but missed the 20% off any single item.

I want a scanner and I’ve had my eye on the icon t8. Still not sure which one I should get in the $400-800 range.
These days there are sure a lot of options for bi-directional scan tools in that range.

I’ve gone back and forth on if I should get one [bi-directional scan tool], for me it’s a tough sell since the only obd2 vehicle I have is my 2nd gen ram. Really for it a DRBIII would be the best, or an emulator, as my one main need would be to talk to the SRS system to pull codes and perform the proper reset procedure for it.

Seems like certain scan tools do better with certain makes than others. For obd1 (with correct adapters) and early obd2 stuff it seems like most regard the older Snap-Ons to be the best as far as communication to various modules.

If you haven’t already, maybe give a look on YouTube at Pine Hollow Auto Diagnostics and Watch Wes Work, they both use a variety of scanners depending on what they are working on. Snap-on, launch, topdon, Autel, etc.

Not responsible if you get a headache trying to make sense of what is the best for the $$ lol.
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,601
Reaction score
9,120
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Have you ever experienced a fire from your lithium batteries? Maybe I’ve been lucky, but I still have 12 year old Makita Li-ion batteries that have survived commercial use, been dropped from ladders and generally ridden hard and put away wet.
No fires,people say they catch fire,I've never seen it. I have bricked some KoBalt lithium ions by running them on nicad tools, also bricked a worx battery. I've been doing this more than a decade. I've never had a problem since I started using Ryobi batteries,as best I can remember,they discharged too fast got hot,and never worked again.
 
Last edited:

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
2,613
Reaction score
6,886
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
Here is the remainder of the 12 days of deals coupons, or at least what they were. I see that a couple of days they have added a second item.
You must be registered for see images attach
 

ChuckN

Full Access Member
Joined
Nov 8, 2022
Posts
1,387
Reaction score
4,319
Location
Bellinham, WA
First Name
Chad
Truck Year
1981
Truck Model
C10
Engine Size
350
You must be registered for see images attach

Started on the second bin rack yesterday. It’s a helluva chore with only being able to bend one leg. Then I got the framing screwed together and realized I mismeasured- at that point my one good leg was cooked from taking all the weight so I gave up and put up the feet for some rest. Feel like I’ve been to a one legged a$$ kicking contest.

As far as actual tools, I’m pretty happy these days. The wife asked me about anything else for Christmas so she’s getting me a clamp on dial indicator.

One thing I’m not so sure about is going to torx bits for all the screws these days. But maybe I just don’t remember how bad Phillips head screws are to deal with.
 

Blue Ox

Turning Diesel Fuel Into Fun
Joined
Mar 27, 2018
Posts
5,255
Reaction score
12,183
Location
LI-NY
First Name
Derek
Truck Year
MCMLXXXV
Truck Model
K20HD
Engine Size
6.2L
Don't know if this counts but my workshop build gets stated Wednesday. Hired a group to put up a roof. 40'x60', of that ill have a 40'x48' shop area... should be nice when I get it done in a year or two :)

You know the rules.

Pics or it didn't happen!
 

ChuckN

Full Access Member
Joined
Nov 8, 2022
Posts
1,387
Reaction score
4,319
Location
Bellinham, WA
First Name
Chad
Truck Year
1981
Truck Model
C10
Engine Size
350
Never knew self adjusting channel locks existed. Gonna get a set. Any Cons to them?

You must be registered for see images attach


Husky Self Adjusting Channel Locks
I’ve had a large set that my dad got for me from Craftsman about 25 years ago. Maybe less, maybe more, but they’ve always been helpful in a “quick scenario “ but I prefer a regular set if I really want to pinch onto something with my hand strength. Since it auto-grabs a “notch “, sometimes it’s not quite the right one- a standard set is slower (obviously) but allows you to grab your own “notch” depending on hand strength and size.

How’s that for a wordy answer? :anitoof:
 

Latest posts

Forum statistics

Threads
44,416
Posts
957,117
Members
36,753
Latest member
TheRigLivesOn
Top