12v Swap Into 87 C30

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

J

Jarrett Melvin

Full Access Member
Joined
Oct 17, 2020
Posts
94
Reaction score
45
Location
Newfoundland
First Name
Jarrett
Truck Year
1983
Truck Model
C20
Engine Size
350
Finally got around to getting some progress on my 12v swap. Truck started out C30 cab and chassis. Swapped Dana 44 I had I under it. Got a 12v pump out of a 94 with a 47rh trans.

Used the gforce conversion crossmember and motor mounts. Offroad design for the Springer hangers for the straight axle.

Engine with perfect with the crossmember and mounts but will have to lift the body got clearance for trans and tcase.
 

Attachments

  • Snapchat-1025873298.jpg
    Snapchat-1025873298.jpg
    106.7 KB · Views: 49
  • Snapchat-401423237.jpg
    Snapchat-401423237.jpg
    125.4 KB · Views: 49
  • Messenger_creation_c18a9507-52cb-48ff-90b7-099d61db9327.jpg
    Messenger_creation_c18a9507-52cb-48ff-90b7-099d61db9327.jpg
    62 KB · Views: 41
  • Messenger_creation_80d676fa-5460-46d9-a61f-02b565fcc27c.jpg
    Messenger_creation_80d676fa-5460-46d9-a61f-02b565fcc27c.jpg
    63 KB · Views: 38
C

CalSgt

Full Access Member
Joined
Oct 3, 2021
Posts
1,736
Reaction score
3,918
Location
CA
First Name
Casey
Truck Year
1980
Truck Model
Chevy K-10 Custom Deluxe
Engine Size
350
Jarrett Melvin said:
Still using the dodge tcase for now, it's driver side drop. But I ain't got anything gm to mate to the 47rh. I had a 208 that I read should match, but spline was different
Click to expand...
There are a few different input shafts for the 208…. I can’t remember which was which though.

You may also be able to swap the input shaft from a 241 into a 208, those two TC’s are nearly identical inside
 
J

Jarrett Melvin

Full Access Member
Joined
Oct 17, 2020
Posts
94
Reaction score
45
Location
Newfoundland
First Name
Jarrett
Truck Year
1983
Truck Model
C20
Engine Size
350
CalSgt said:
There are a few different input shafts for the 208…. I can’t remember which was which though.

You may also be able to swap the input shaft from a 241 into a 208, those two TC’s are nearly identical inside
Click to expand...
That's interesting, I should definitely look into that
 
J

Jarrett Melvin

Full Access Member
Joined
Oct 17, 2020
Posts
94
Reaction score
45
Location
Newfoundland
First Name
Jarrett
Truck Year
1983
Truck Model
C20
Engine Size
350
Installed 2 inch body left and painted. Pretty sure I essed up the lines and position of the white stripe but what's done is done now, lol. Have new doors on order. Need to paint the hood, cowl and can visor as well. Put some old doors and the hood on for now to make her weather tight while I went back to work. Hopefully have it running and driving next hitch home.
 

Attachments

  • Messenger_creation_5dcf5ad8-7f9d-4281-a1cb-48d5a64408d1.jpg
    Messenger_creation_5dcf5ad8-7f9d-4281-a1cb-48d5a64408d1.jpg
    102.4 KB · Views: 24
  • Messenger_creation_da11a5a9-902b-4515-93d4-d34df87ca228.jpg
    Messenger_creation_da11a5a9-902b-4515-93d4-d34df87ca228.jpg
    98.9 KB · Views: 23
V

vr1967

Full Access Member
Joined
Apr 16, 2023
Posts
252
Reaction score
887
Location
Mississippi
First Name
Virgil
Truck Year
1984
Truck Model
k1500
Engine Size
6.2L turbo
It’s said and done now, but with a little work, could have got everything tucked in without needing a body lift.

If you want to run a mechanical fan, swap out your second gen fan hub for a 1st gen one. It should give you and extra inch or so of clearance. Get the fan to match the one you get as 89-91.5 non intercooled are different from the 91.5 to 93 Intercooled.

Second gen on left, 1st gen on the right.

I've done several Cummins swaps in GM trucks.


You must be registered for see images attach
 
bucket

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,640
Reaction score
28,945
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
CalSgt said:
There are a few different input shafts for the 208…. I can’t remember which was which though.

You may also be able to swap the input shaft from a 241 into a 208, those two TC’s are nearly identical inside
Click to expand...

I'm pretty sure the inputs don't swap between the 208 and 241.

But hopefully I'm wrong about that because if so, I could have fixed up one of my 208s already.
 
J

Jarrett Melvin

Full Access Member
Joined
Oct 17, 2020
Posts
94
Reaction score
45
Location
Newfoundland
First Name
Jarrett
Truck Year
1983
Truck Model
C20
Engine Size
350
Got the new doors, good and visor painted. New mirrors and new door parts installed. Got stock Chevy alternator installed. Fan and rad in to, but never got any pics. Hoping to get everything hooked up and running next hitch home.
 

Attachments

  • PXL_20241104_175117091.jpg
    PXL_20241104_175117091.jpg
    111.5 KB · Views: 14
You must log in or register to reply here.

Similar threads

D
K-30 12v Swap
2
Replies
20
Views
4K
DSnyde34
D
B
1984 c30 International DT466 Swap Questions
Replies
4
Views
301
Biggnate81
B
J
12v Swap Fuel Sending Units
Replies
5
Views
608
Jarrett Melvin
J
R
Parking Brake cable routing 131.5" C30 Dually
Replies
2
Views
1K
RottenSquare
R
C
Squarebody chassis swap build help: Were there any exterior differences between 81-87, 2wd/4wd and weight classes (c10, k30, etc)
Replies
4
Views
1K
PrairieDrifter
PrairieDrifter

Latest posts

Forum statistics

Threads
44,428
Posts
957,697
Members
36,793
Latest member
koolblue84
Top