Kick panel leaking

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ajwic1

Junior Member
Joined
Mar 3, 2024
Posts
11
Reaction score
3
Location
Nelson, BC, Canada
First Name
Alex
Truck Year
1981
Truck Model
c2500
Engine Size
5.7L v8 (350)
I've read all the threads related to this but I cant seem to find a clear answer or solution that has worked for me.

I'm getting water coming in somewhere behind my kick panels when it rains (seal/bolt holes, something else). I have removed cowl and sealed it with seam sealer. I have removed ALL debris from the plenum. Problem is when I remove the kick panel its hard to pinpoint where its coming in. By the looks of it the seals are shot (they are foam), which I plan on replacing. Is this seal something that would stop water because it looks like more of an air seal?

I guess I'm asking if anyone has fixed their problem by replacing those seals and if anyone has any other experiences where it could be leaking from. (No its not windshield - i tested by placing hose in the cowl only.)
 

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,877
Reaction score
5,710
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350
All of the cowl water will go by that inlet so yes that's probably your water source
 
Joined
Mar 27, 2023
Posts
41
Reaction score
14
Location
Richmond, VA
First Name
Andrew
Truck Year
1987
Truck Model
R10
Engine Size
305
I have done everything and mine still leak. Bout ready to sell at this point.
 

gmbellew

Full Access Member
Joined
May 27, 2018
Posts
1,239
Reaction score
1,327
Location
Kansas city
First Name
glen
Truck Year
1990
Truck Model
suburban 1500
Engine Size
350
the cowl drains exit behind the front fenders. watch where water comes out when you dump a hose into the cowl. there is a plastic trim piece to remove, if still present, and a little piece of permeable foam to pull out of the way. then you have to reach up with a stick or something and pull out what you can. then flush water down. then pull out what you can. and repeat that process until nothing else comes down on both sides. it is a wet and dirty job to do this. then push the foam piece back and reinstall the plastic trim piece. sealing up everything to keep water out just masks the problem that debris is holding water in there.
 

Latest posts

Forum statistics

Threads
44,416
Posts
957,117
Members
36,753
Latest member
TheRigLivesOn
Top