TBI distributor 454/7.4L

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Sgt Gus

Sgt Gus

Full Access Member
Joined
Aug 2, 2023
Posts
257
Reaction score
388
Location
Texas
First Name
Mark
Truck Year
87
Truck Model
R20 3/4 ton
Engine Size
454ci/7.4L
Ugh,
My 454, TBI distributor is a .427 shaft, I need a .491 or .500 to order a distributor melonized gear for comp hydraulic roller(11-412-8). They don't make one for the .427
Replace the distributor and coil?
I am having a hard time finding one.
Recommendations pretty please
#gmbellew #catbox
 
Last edited:
R

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,445
Reaction score
8,677
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Sgt Gus said:
Ugh,
My 454, TBI distributor is a .427 shaft, I need a .491 or .500 to order a distributor melonized gear for comp hydraulic roller(11-412-8). They don't make one for the .427

Replace the distributor and coil?
I am having a hard time finding one.

Recommendations pretty please
Click to expand...
I'd make a bushing,either make the OD .0005 to big or the ID .0005 to small,use heat and a freezer to put the 2 together. Meaning if the ID is too small heat the bushing freeze the distributor put the 2 together,when the temps equalize it will be 1 piece. Come to think of it I'd make the OD of the bushing,ID of the gear my interference,you can get more expansion on the larger diameter. So it would be heat the distributor gear freeze the bushing.
 
Last edited:
bucket

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,438
Reaction score
28,342
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Sgt Gus said:
Ugh,
My 454, TBI distributor is a .427 shaft, I need a .491 or .500 to order a distributor melonized gear for comp hydraulic roller(11-412-8). They don't make one for the .427

Replace the distributor and coil?
I am having a hard time finding one.

Recommendations pretty please
Click to expand...

Are you positive you need a melonozed gear? A lot of Comp's BB hydraulic roller cams don't require one.

Besides that, MSD offers a fancy drop-in distributor. The big block uses the same distributor as a small block too, unless you have a tall deck block.
 
Sgt Gus

Sgt Gus

Full Access Member
Joined
Aug 2, 2023
Posts
257
Reaction score
388
Location
Texas
First Name
Mark
Truck Year
87
Truck Model
R20 3/4 ton
Engine Size
454ci/7.4L
bucket said:
Are you positive you need a melonozed gear? A lot of Comp's BB hydraulic roller cams don't require one.

Besides that, MSD offers a fancy drop-in distributor. The big block uses the same distributor as a small block too, unless you have a tall deck block.
Click to expand...
I am rereading, machinist thought so.
I may call comp tomorrow.
 
Sgt Gus

Sgt Gus

Full Access Member
Joined
Aug 2, 2023
Posts
257
Reaction score
388
Location
Texas
First Name
Mark
Truck Year
87
Truck Model
R20 3/4 ton
Engine Size
454ci/7.4L
So, yes comp says their special gear is required or a melonized one per engine shop.
Easiest to replace distributor for tbi...?
 
Bextreme04

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,439
Reaction score
5,581
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
Sgt Gus said:
So, yes comp says their special gear is required or a melonized one per engine shop.
Easiest to replace distributor for tbi...?
Click to expand...
Factory 97-up 7.4L distributor gear is the answer here. I put one on my 97 K2500 454 when I rebuilt everything. It's a factory AC Delco part. GM PN 10457708

Its a melonized gear for the factory billet hydraulic roller cams.
 
Sgt Gus

Sgt Gus

Full Access Member
Joined
Aug 2, 2023
Posts
257
Reaction score
388
Location
Texas
First Name
Mark
Truck Year
87
Truck Model
R20 3/4 ton
Engine Size
454ci/7.4L
Bextreme04 said:
Factory 97-up 7.4L distributor gear is the answer here. I put one on my 97 K2500 454 when I rebuilt everything. It's a factory AC Delco part. GM PN 10457708

Its a melonized gear for the factory billet hydraulic roller cams.
Click to expand...
What diameter will it fit? Mine is .427, and most are .491 or .500
 
Bextreme04

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,439
Reaction score
5,581
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
Sgt Gus

Sgt Gus

Full Access Member
Joined
Aug 2, 2023
Posts
257
Reaction score
388
Location
Texas
First Name
Mark
Truck Year
87
Truck Model
R20 3/4 ton
Engine Size
454ci/7.4L
Sgt Gus

Sgt Gus

Full Access Member
Joined
Aug 2, 2023
Posts
257
Reaction score
388
Location
Texas
First Name
Mark
Truck Year
87
Truck Model
R20 3/4 ton
Engine Size
454ci/7.4L
bucket

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,438
Reaction score
28,342
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
I'd trust the Summit part. It's just the price that a part like that should be, without the performance markup of the name brands.
 
Sgt Gus

Sgt Gus

Full Access Member
Joined
Aug 2, 2023
Posts
257
Reaction score
388
Location
Texas
First Name
Mark
Truck Year
87
Truck Model
R20 3/4 ton
Engine Size
454ci/7.4L
I'm gonna get that summit gear and put on our old remanufactured distributor and have as a replacement.
For now I got an MSD-5591 made for it with melonized gear. Verified with MSD engineer with phone call. .491 dia shaft ‍
Current appears to be remanf #1103749, .427 dia.
I think original ACDelco is 1103952. You can find alot of reman on internet for those. Not sure the dia. of shaft.
Current ACDelco replacement should be 19179575 per gm/ACDelco website. It does not give a diameter. Cost $$$$, but can find on net for $320-360.
It does say via some support person made for newer hydraulic roller cams, but mentions gear is not melonized.
That's what I got if helpful to anyone in decision making process.
 

Attachments

  • Screenshot_20241018_140645_Chrome.jpg
    Screenshot_20241018_140645_Chrome.jpg
    67.1 KB · Views: 15
You must log in or register to reply here.

Similar threads

P
Tbi hesitation/stall from stop *solved*
Replies
3
Views
1K
496bb
496bb
T
Repeated stalling
Replies
14
Views
525
77Dmax
7
A
(solved) Tbi injector not pulsing on startup
Replies
13
Views
7K
squaredeal91
squaredeal91
RanchWelder
5 Pin Ignition Module / 1103465 HEI Distributor (for specific Electronic Spark Control Engines)
Replies
2
Views
2K
RanchWelder
RanchWelder
P
Direct fit air cleaner '89 454 w/tbi
Replies
0
Views
2K
PiutePete
P

Latest posts

Forum statistics

Threads
44,157
Posts
950,559
Members
36,268
Latest member
JUKA
Top