3M Tape on cab moldings

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

M

miguelt4

Junior Member
Joined
Aug 16, 2023
Posts
6
Reaction score
6
Location
California
First Name
Miguel
Truck Year
1981
Truck Model
C10
Engine Size
5.7
I have a 1981 That has no cab moldings at all not even the holes where they go has anyone every used 3M tape if so how has it hold up do you happen to have any pictures thank you.
 
Shorty81

Shorty81

Baby Boomer
Joined
Mar 19, 2018
Posts
3,107
Reaction score
5,797
Location
North West ohio
First Name
Darren
Truck Year
86
Truck Model
K20
Engine Size
496
I used 3M tape for my badges 10 years ago, they are still holding strong.
 

Attachments

  • IMG_20200609_103612_kindlephoto-1658963.jpg
    IMG_20200609_103612_kindlephoto-1658963.jpg
    68.2 KB · Views: 32
legopnuematic

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
2,529
Reaction score
6,567
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
3m VHB- Very High Bond tape is what you want.
 
BadBowtie

BadBowtie

Full Access Member
Joined
Mar 4, 2023
Posts
185
Reaction score
224
Location
North Texas
First Name
Jon
Truck Year
1984
Truck Model
Chevrolet
Engine Size
5.0L
You can get the factory style clips and use sheet metal screws to attach them to the back of your cab. Drill the holes for the corner moldings...
 
Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,990
Reaction score
12,267
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
BadBowtie said:
You can get the factory style clips and use sheet metal screws to attach them to the back of your cab. Drill the holes for the corner moldings...
Click to expand...
Yes. I was thinking side moldings when I posted. But the Op hasn’t been back to his thread to confirm.
When I put the rear cab band on the 86 (weird it was a fully loaded truck with about every option except that piece), I thought about trying to stick the clips on with vhb tape. But decided I didn’t want to test my theory and just drilled the holes.
 
M

miguelt4

Junior Member
Joined
Aug 16, 2023
Posts
6
Reaction score
6
Location
California
First Name
Miguel
Truck Year
1981
Truck Model
C10
Engine Size
5.7
Grit dog said:
Tailgate C10 Yes. I was thinking side moldings when I posted. But the Op hasn’t been back to his thread to confirm.
When I put the rear cab band on the 86 (weird it was a fully loaded truck with about every option except that piece), I thought about trying to stick the clips on with vhb tape. But decided I didn’t want to test my theory and just drilled the holes.
Click to expand...
Yes I was taking about the cab molding the one below the rear window and side of cab
 
brooksman9

brooksman9

Full Access Member
Joined
Sep 26, 2021
Posts
559
Reaction score
1,612
Location
Olive Branch, MS
First Name
Patrick
Truck Year
1986
Truck Model
Silverado & Custom Deluxe
Engine Size
350 & 305
They make special trim screw you can use to put the molding clips on if you desire to go that route. They would take the place of the little posts. Same as for windshield molding. You can get them on ebay cheap.
 
W

WWOLFE68

Junior Member
Joined
Jul 28, 2024
Posts
13
Reaction score
31
Location
Ontario, NY
First Name
Wes
Truck Year
1979 & 1987
Truck Model
K10 & R10
Engine Size
350
Any link or part# for the trim screws referenced above? I purchased NOS 3 piece cab molding and small.tailgate band for.my 79. Really want to just use 3m vhb tape but nervous of going that route
 
Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,990
Reaction score
12,267
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
WWOLFE68 said:
Any link or part# for the trim screws referenced above? I purchased NOS 3 piece cab molding and small.tailgate band for.my 79. Really want to just use 3m vhb tape but nervous of going that route
Click to expand...
I think the back piece cab molding would work if using the plastic clips. The corner pieces need to be drilled and fastened with the nut though. Plus if the tape fails it won’t fall off as it’s also retained by the corner pieces.
Idk about the small 70s tailgate band. Depends how much surface area you have for the tape to contact. I know it won’t work for the big tailgate bands.
 
brooksman9

brooksman9

Full Access Member
Joined
Sep 26, 2021
Posts
559
Reaction score
1,612
Location
Olive Branch, MS
First Name
Patrick
Truck Year
1986
Truck Model
Silverado & Custom Deluxe
Engine Size
350 & 305
You must log in or register to reply here.

Similar threads

BadBowtie
1981-82 Metal Lower Tailgate Mldg
2
Replies
26
Views
2K
Chugalugg
C
T
Adhesive Rear Cab Molding?
Replies
3
Views
747
Grit dog
Grit dog
Haydenh
Crewcab body swap on Regular Cab C&C 159.5" WB?
2
Replies
25
Views
3K
squaredeal91
squaredeal91
D
Oil Leak Into Cab
2
Replies
21
Views
2K
SquareRoot
SquareRoot
Scrambles
1982 K3500 RTT on cab
Replies
6
Views
541
Scrambles
Scrambles

Latest posts

Forum statistics

Threads
44,219
Posts
951,984
Members
36,377
Latest member
drewdavis83
Top