squaredeal91
Full Access Member
- Joined
- Mar 10, 2023
- Posts
- 2,453
- Reaction score
- 4,384
- Location
- Cave junction Oregon
- First Name
- Greg bush
- Truck Year
- 1991 SB
- Truck Model
- K30
- Engine Size
- 5.9 Cummins 12 valve
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I approve of this post. Will also come in handy for breaking the rust bond between the hub assembly and spindle. I wish I had thought of this actually haha. Good play sir.If you have/can source new nuts and just need to get them off, there is always the pneumatic universal wrench.
You must be registered for see images attach
I had thrown that in there in jest, but I would totally do it. I should say I have done it. Most recent, tearing down a couple 14b semi floats to evaluate, had a socket for the pinion nuts, but did not have a 3/4 drive ratchet or breaker bar, or adapter from 3/4 to 1/2. So air hammer and chisel, grab a flat and they broke loose and spun off pretty easy that way.I approve of this post. Will also come in handy for breaking the rust bond between the hub assembly and spindle. I wish I had thought of this actually haha. Good play sir.