YakkoWarner's latest activity
-
YYakkoWarner replied to the thread 1988 Suburban Door Locks.I have a 1989 Suburban with power locks. The ECU is in no way linked to the power door locks. The rear door does have a power lock...
-
YYakkoWarner replied to the thread 87 r10 TBI.If you find a tilt column and want to sell your non-tilt one, let me know. I am looking for a non-tilt one and I'm pretty sure the 1987...
-
YYakkoWarner replied to the thread Advice on GM 14 Bolt Corporate Full Float w/3.73 gears that are junk.My R2500 Suburban (1989/454/TH400) came with the trailer tow package and has the 14bolt full floater setup with 3.73 gears. I'm...
-
YYakkoWarner replied to the thread Brought home my first square body. 1980 Silverado C10. Utah.You can still watch Vice Grip Garage on his Youtube channel. VGG, Puddin's Fab Shop and Mortske Repair (all on youtube) frequently do...
-
YYakkoWarner replied to the thread 1982 250cu fuel issue.I had a brand new mechanical fuel pump on a Jeep (using the GM 4 cylinder "iron duke" engine) that failed after the first startup -...
-
YYakkoWarner replied to the thread Starter drag when engine is warm.Very true - my Jeep uses a ford-style external solenoid and I had an aftermarket one stick "on" - good way to ruin a starter if the...
-
YYakkoWarner replied to the thread Starter drag when engine is warm.My old F250 used to do this exact same thing - crank like mad when cold but I had to park on hills when I went to the store and find a...
-
YYakkoWarner replied to the thread big block starter replacement.I just went with what the auto parts store had available on the shelf - it wasn't hard to do and since my original one was beyond dead...
-
YYakkoWarner replied to the thread HELP! My truck won’t start!.You got me on that one. As long as the rotor is pointing at the right wire it will run just fine however. I wouldn't re-stab a...
-
YYakkoWarner replied to the thread Need Help! 1987 R10.If you are running really rich, something is telling the TBI to crank the injector pulse way up. First place I'd look is the temp...
-
YYakkoWarner replied to the thread Finally got a new mig welder.I use a Hobart 140 and get decent results, but I know I'm not great at welding. I look at welders like musical instruments - if you buy...
-
YYakkoWarner replied to the thread Radio question.A product called "DeOXit" can help with that - the variable resistors moved by the knobs get oxidation on them (and the switch...
-
YYakkoWarner replied to the thread HELP! My truck won’t start!.There is no rule the says the rotor HAS to be physically pointed at the #1 plug - it is common practice and not a bad idea but as long...
-
YYakkoWarner replied to the thread Can I use this hole for filling oil?.I have similar covers on my 454 in the Suburban and I fill through one of them all the time. If you angle the funnel right it will...
-
YYakkoWarner replied to the thread This one needs to go, asking for opinions. Offering it up here first..Also agree - I had to do all new floors in an MGB (easy relative to some vehicles - all flat panels with ribbing no curves). I'd do...
