YakkoWarner's latest activity
-
YYakkoWarner replied to the thread 1990 Suburban oil pressure gauge only reads 30 PSI.Did that dedicated ground on the O2 sensor make a notable difference? Asking because I get intermittant (come and go kind of randomly)...
-
YYakkoWarner replied to the thread 1987 Silverado fuel issue.If you're getting that click at 2 seconds, then most likely the ECM is working properly in that aspect. Putting 12V directly onto that...
-
YYakkoWarner replied to the thread Just curious..Could also possibly be a failed intake gasket. Since removing the intake is one of the first steps in pulling a head anyway, its a...
-
YYakkoWarner replied to the thread Just curious..A valve seal could also be allowing trace amounts of something into the combustion chamber as well - probably on the intake side since...
-
YYakkoWarner replied to the thread Header swap begins..Those Whitworth wrenches could be well worth their weight in precious metal in the right setting. I have several peices of vintage...
-
YYakkoWarner replied to the thread Narrowing a Square Fleetside Bed.Only thing I would consider with that would be to narrow the gate by trimming equal amounts off both sides rather than a chunk out of...
-
YYakkoWarner replied to the thread Engine cranks, but only starts after letting off key? - I'm perplexed.You are chasing similar problems to what I have been experiencing on my 1989 Suburban - not identical though. If you can trigger the...
-
YYakkoWarner replied to the thread 1989 suburban AC blow pressure.An obstruction at the blower input is a possibility, but I'd also check your vacuum operated air doors and ensure they are working...
-
YYakkoWarner replied to the thread Header swap begins..I am planning on using that kind of wrap on an MGB to avoid melting the floor mats and seat (the pipe passes under the floor with less...
-
YYakkoWarner replied to the thread European 86 C20 454.Interior looks very much like mine, but your exterior has a lot more shine. It tooke me 2 full days to polish a small Mazda hatchback...
-
YYakkoWarner replied to the thread 1990 Suburban oil pressure gauge only reads 30 PSI.Thats interesting because my 1989 Suburban has the 3 pin combined pressure sensor/switch, but it is installed on the side of the block...
-
YYakkoWarner replied to the thread Now we move into desperation territory (seeking advice)....The Holley isn't really my first choice either - it seems more targeted to the performance upgrade demographic which isn't where I'm...
-
YYakkoWarner replied to the thread Now we move into desperation territory (seeking advice)....Well I just got my claims-to-be-remanufactured ECM about 3 hours ago, I'm certainly going to try this first and see if it solves my...
-
YYakkoWarner replied to the thread Now we move into desperation territory (seeking advice)....MegaSquirt looks like quite a neat solution - only problem is I'm not sure who I could hire to assemble the thing since it apparently...
-
YYakkoWarner replied to the thread General Motor Swap Questions.Only thing I'd add (having done engine swaps but not specifically Chevy) is be prepared to deal with broken bolts and studs - may be...
