WFO's latest activity
-
For me, I like the the original metal wiper blades. Use them for years and just buy refills. I guess parts houses don't even sell... -
Slowly working on the Interior of the 'burb. Got the pirate crew hard at work.
-
I get that square dually beds are getting harder to find but trust me, neither bed is going to look decent on there. Nothing lines up...
-
No
-
If it's a rough work truck and you just purely need a bed, go for it. If you care about what the truck looks like, keep looking. I've...
-
butyl is likely what you are talking about, if i had to guess butyl is goopy and stays tacky for a long time and can be reapplied with a...
-
This is correct. Sort of a super thin two-sided black adhesive tape. The screws had sort of a waxy daub on the end which spread across...
-
couldn't resist....
-
Mine was a little worse than that, once I got it cleaned up I used and 3m sandable, paintable sealer to smooth it all up. It wasn't...
-
Trans The two light colored spaces where my fingers are pointing is where the needle bearings sit on the female section of the other...
-
If you have a point fired distributor for breakin they are easier to set static timing. For cam breakin you should use breakin springs...
-
Besides, I love them on a toggle switch. When someone is riding your azz and you get to the next light, you can turn on the back up...
-
The switch I pictured in post 14 is only on when there is tension pulling on the spring. So you mount it where ever, but close to the...
