Turbo4whl's latest activity
-
Turbo4whl replied to the thread Finally got a running 65 C10.The RPM drops from 4000 or 4500 to about 3000 RPM. No, never a no-lift. I abused it enough as it was. "You gotta run what you brung" -
Turbo4whl replied to the thread Finally got a running 65 C10.Okay, for clarity lets call low gear first, then 2,3,4. Here is how: Start in first, mash the throttle, dump the clutch and the truck...
-
Turbo4whl replied to the thread Finally got a running 65 C10.I don't completely agree....
-
Yep. Can that instinct to slow down. Years ago (I was 40 or so years younger and crazier then), I was coming home from work in a snow...
-
Turbo4whl replied to the thread Daughters ‘87 needs to ride smooth..Firestone got a bad rap with their 721's because Ford marked the tire pressure lower to smooth the ride. Safety note most people don't...
-
So called experts and the issue of tires and tire pressure drive me nuts. For example: (1) I've had cars that ran the exact same tire...
-
SWB doesn’t have enough of them… ;) The “grandpa cap” is going back on the truck, so will be facing the same mounting issues. Going to...
-
Turbo4whl replied to the thread Hello, my name is Derek, and I have Just joined this page, trying to find some good information on working on my new 1978 k30.Dead radios, I got a picture. And a bonus, trunk mounted factory Motorola reverb unit!
-
-
Turbo4whl replied to the thread Whip antenna for CB on a Suburban.If you don't want to drill holes in the fender, another choice is a bumper mount. This mounted near the end of the bumper will line up...
-
Turbo4whl reacted to HotWheelsBurban's post in the thread Whip antenna for CB on a Suburban with
Like.
Dad had a 23 channel CB in the 75 Sierra Classic, mounted under the dash over the transmission hump. Don't remember what kind of antenna... -
Turbo4whl replied to the thread Whip antenna for CB on a Suburban.@Fight Milk For the Suburban, get a gutter clip for the whip.
-
-
The way I removed them is with a punch .. Hammer on one side to get them tilted in the bore then with vice grips pull them out of the...
-
The freeze plugs was on their last legs, new was needed years ago ..
-
Covers came out good
