Turbo4whl's latest activity
-
Turbo4whl replied to the thread Need Help with Rear Brakes..I was thinking this too. I have also seen where the light switch in the proportioning valve breaks off and jams the valve. If this... -
Only reason I didn't go there,is he said he bled them with the centering tool in place. My gut said the same thing.
-
The proportion valve is tripped an blocking the rears off. Either recenter it manually or go ahead an bleed a front. That should make it...
-
Turbo4whl replied to the thread Need Help with Rear Brakes..If the rear brakes shoes are not adjusted out to the drums, then you will have trouble bleeding the rear cylinders. Remember the (self)...
-
Alternative refrigerants can be made to work effectively, but now you have a system that nobody else can work on. You are forever your...
-
Turbo4whl replied to the thread Newbie needing help.Are you also new to a carbureted vehicle that has a choke? You do know, you need to set the choke before starting the truck. Push the...
-
Turbo4whl replied to the thread Gm 12 bolt gear pattern help. ?.@59840Surfer Backlash is set last. Backlash IS very important to get the correct pattern.
-
Backlash is what's left over after the patterns are correct. There's too much emphasis on backlash - and it can be understood as it's...
-
Turbo4whl replied to the thread Gm 12 bolt gear pattern help. ?.Oh, then reset the back lash.
-
Turbo4whl replied to the thread Gm 12 bolt gear pattern help. ?.So your pinion needs to move closer to the ring gear. Keep in mind the gears need to be loaded when checking the pattern. Easiest way I...
-
Turbo4whl replied to the thread Gm 12 bolt gear pattern help. ?.Welcome to the forum. Please note the drive side of the ring gear. Your pictures are showing the coast side. The top picture is what...
-
