Truck82's latest activity
-
https://bringatrailer.com/listing/1987-chevrolet-r10-pickup-20/ -
Hmmm. Super nice truck but I question the 1600 miles. Also all that black underneath makes me go hmmm. Can't tell if it's undercoating...
-
Hey everyone! I am installing an electric choke on my carb and know very little about electrical. The manual that came with the choke...
-
-
Truck82 replied to the thread Really tight front brakes!.So the warped rotor is ok to leave be? I don’t want to cause and damage but don’t want to replace unless I have too
-
Yeah just a little warped probably. Doesn’t take much. If it was bad you’d feel it. The difference in how they spin is not necessarily...
-
Truck82 replied to the thread Coil spring lift spacer questions.Pictures? :popcorn:
-
I actually had the driver side spirng wrong, the lower end of the coil was not in the pocket of the A-arm. I had the ball joint already...
-
Truck82 replied to the thread Really tight front brakes!.The front brakes don’t get hot at all. The passenger side wheel spins fine but the driver side has resistance. There is also a on/off...
-
^What he said. And if the front brakes aren’t getting too hot and you can feel them working then likely no brake issue. And if you...
-
I got a 3d printer to complement my cnc router and cnc plasma. Looking forward to making automotive parts. First project will be...
-
I bought a thing! Should help me adjust my rear drums a bit quicker.
-
You may not have set one of the springs properly in its' pocket. Not uncommon for these old trucks to vary a bit in ride height from one...
-
I got it back together. The McBay thinnest spacers that were supposed to lift 1" actually lifted 1.5" on one side and some more on the...
-
You should be able to turn the front wheels by hand. There should be some resistance, if you give them a good spin and let them free...
-
Yep, and you probably never will see a vacuum booster on a diesel equipped unit. Not unless that diesel has an external vacuum pump.
