Forums
New posts
Search forums
What's new
New posts
Latest activity
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
Registered members
Current visitors
Menu
Log in
Register
Install the app
Install
Members
TotalyHucked's latest activity
TotalyHucked
reacted to
AuroraGirl's post
in the thread
6.0 NV4500 K30 swap
with
Like
.
To prevent PCV issues, buy the GM or dorman driver side valve cover, and put the revised PCV to work. Also, a catch can if you want to...
Dec 5, 2024
TotalyHucked
reacted to
Raybob9289's post
in the thread
6.0 NV4500 K30 swap
with
Love
.
Last summer was the put it on the correct frame and this winter its 6.0/ NV4500 swap on my 77 Cheyenne K30 dually. I can't stand the 454...
Dec 5, 2024
TotalyHucked
reacted to
Craig Nedrow's post
in the thread
BBC 489 build
with
Like
.
After much checking, and inspecting, I have selected a local shop to do the machine work. Dick the head guy is an ol' coggie like me...
Dec 5, 2024
TotalyHucked
reacted to
Craig Nedrow's post
in the thread
BBC 489 build
with
Like
.
My block is a two bolt main, so I bought Arp studs, which have a higher torque value. I have kicked around the thought of installing the...
Dec 5, 2024
TotalyHucked
reacted to
Craig Nedrow's post
in the thread
BBC 489 build
with
Like
.
I like "pretty" engines, so i bought brass freeze plugs. I will deburr the engine on the outside, and perform a number free hp upgrades...
Dec 5, 2024
TotalyHucked
reacted to
Craig Nedrow's post
in the thread
BBC 489 build
with
Like
.
Part of the equation also are the harmonic balancer, and the flex plate. Both these pieces will do the job, and are SFI approved. These...
Dec 5, 2024
TotalyHucked
reacted to
Craig Nedrow's post
in the thread
BBC 489 build
with
Like
.
It's been tested, the stock BB can handle 600hp, but the weak links are the hypereutectic stock pistons and the rods, more specific the...
Dec 5, 2024
TotalyHucked
reacted to
Craig Nedrow's post
in the thread
BBC 489 build
with
Like
.
To build a thermally efficient motor, you need some compression, and I have settled on 10.5 target. Pistons have a 20cc dome, a .010...
Dec 5, 2024
TotalyHucked
replied to the thread
BBC 489 build
.
That should be a fun little setup
Dec 5, 2024
TotalyHucked
reacted to
Craig Nedrow's post
in the thread
BBC 489 build
with
Love
.
To build a 489, requires a 4.25 stroke, with a 4.280 bore, so pretty square. Crank is an Eagle cast unit which is plenty good for the...
Dec 5, 2024
TotalyHucked
reacted to
Craig Nedrow's post
in the thread
BBC 489 build
with
Love
.
Block is Mark IV virgin block I have been running. This engine has been excellent, solid, dependable, easy to service, good torque...
Dec 5, 2024
TotalyHucked
replied to the thread
Starter wiring for LS
.
I used the donor '06 Envoy Denali battery cables/start power wires but for the solenoid/key power wire, I used the original '85 wire...
Dec 5, 2024
TotalyHucked
reacted to
1977banana's post
in the thread
Bed mounting hardware for short box step side.
with
Like
.
Ok, so after hunting around, AMD has the correct bolt kits in stock if anyone wants the right ones. They have the long bolt/short bolt...
Dec 5, 2024
TotalyHucked
reacted to
Keith Seymore's post
in the thread
Bed mounting hardware for short box step side.
with
Like
.
The bolts themselves are the same as the fleetside box bolts (there weren't unique bolts between the two). Short vs Long usage would...
Dec 5, 2024
TotalyHucked
reacted to
bucket's post
in the thread
Bed mounting hardware for short box step side.
with
Like
.
The smaller hardware is for the steel strips between the wood. The carriage bolts that mount the bed are 1/2"x13 (course thread) bolts...
Dec 5, 2024
Latest posts
Looking to buy our first 6.2
Latest: Frankenchevy
56 minutes ago
Diesel 6.2, Conversions Cummins, etc.
Texas
Latest: fast 99
Today at 2:28 PM
Other Vehicles
C
Wood Bed Conversion
Latest: Cruck
Today at 2:19 PM
Tech Discussion
Eratic behavior from a 1985 6.2. Requesting help please
Latest: Rickf
Today at 1:58 PM
Diesel 6.2, Conversions Cummins, etc.
Forum statistics
Threads
44,961
Posts
972,281
Members
37,842
Latest member
Scruffy49
Members
Top