Tonimus's latest activity
-
Tonimus replied to the thread Planning my Suburban build - Advice wanted.Go for it. Most of what you're talking about is preference anyway. And what you want is all that matters. *I* prefer to retain... -
Tonimus replied to the thread Project is stalled. Cannot solve brake problem.I'd be willing to bet as others have stated, your throw is wrong. Check out this ebay listing for a picture. When I went from power to...
-
Tonimus replied to the thread 350 bearings questions.If they're not factory sized bearings, any reputable shop that oversized the rods/main caps or undersized the crank would have marked...
-
Tonimus replied to the thread Seat foam for buddy buckets?.I found a 24" x 82" x 4" sheet of 2.5# foam locally for like $110. And that was just the first place I called. Looks like an electric...
-
Tonimus replied to the thread Seat foam for buddy buckets?.Joann seems to only have 1.6# density stuff. I may try it anyway. As far as the covers go, I was going to try to sew my own using them...
-
Tonimus replied to the thread Seat foam for buddy buckets?.
-
-
Tonimus replied to the thread Looking At A 2005 Z71 4x4.I believe the 2005 was the last year or next to last year that did NOT come with DOD. I'd drive the hell out of that truck. Powertrains...
-
Heading out here in a little bit to pick up a set of those 80's aftermarket Qualitex or similar buddy bucket bench seat things. The one...
-
Tonimus replied to the thread Thinking about a new smaller steering wheel, comfort grip or forever sharp?.So many Camaros died like that. Even a dented roller is more that 1k nowadays.
-
Tonimus reacted to Bloodhound1981's post in the thread Thinking about a new smaller steering wheel, comfort grip or forever sharp? with
Sad.
Same here, Actually mine is out of my 1978 Camaro. I bought it when I was 16 for $400 back in 1994. I junked that POS a year later, but... -
I don't know but man does that look good. I went with original style and got it from USA1 Industries. I am happy how it turned out but...
-
Tonimus replied to the thread Ryobi 18v jumper box theories?.A 4s lipo has a "nominal" charge of 14.8V. Full whack is 16.8v. A dead battery will rapidly bring that voltage down. You can get a...
-
Tonimus replied to the thread Thinking about a new smaller steering wheel, comfort grip or forever sharp?.We put a Forever Sharp in by buddy's truck. Looks fantastic.
-
-
Tonimus replied to the thread Wanted: 1985 suburban rear tailgate glass roller spring part.If I'm seeing it correctly, you should be able to source springs pretty easily. They're called torsion springs. Again, if I'm looking at...
-
Tonimus replied to the thread Edelbrock 1405 install.Welcome. Here's what you're looking for. https://www.edelbrock.com/automatic-trans-kickdown-stud-for-1968-later-th350-8018.html
