SquareRoot's latest activity
-
SquareRoot reacted to legopnuematic's post in the thread Oil Pressure Drops After High RPM with
Like.
5-30 is too thin in my opinion for a run of the mill small block or big block. 10-30, 10-40, 15-40, 20-50 for these old mills... -
SquareRoot replied to the thread Electronic Shift NP203/NP205 Doubler.I don't know how to agree with you now that I have Dakota Digital, Vintage Air, Multiport EFI, Self Dimming Mirror and Bluetooth Stereo...
-
SquareRoot reacted to 85K304SPD's post in the thread Electronic Shift NP203/NP205 Doubler with Like.
Welcome, anyways. I guess the word "electronic" and Square body don't (and shouldn't) go together. Show us your that beast.
-
SquareRoot replied to the thread Electronic Shift NP203/NP205 Doubler.Shift levers are manly. Push buttons are not.
-
-
Welcome to the site & let me express how envious I am of what would also be my dream truck. As for the old cast iron cases, I'd leave...
-
SquareRoot replied to the thread 350 tbi running too cold.Assuming your gauge is accurate, I'd say yes. Sounds like its hanging in the open position. It should open and close within 10 degrees...
-
SquareRoot replied to the thread 350 tbi running too cold.If its running less than 195 with a 195 stat, the stat is bad, the sending unit is bad or your gauge is defective.
-
SquareRoot replied to the thread Which leaf to pull.@Ricko1966
-
SquareRoot replied to the thread WebMonkey's latest melt down, poor ol' me, hissy fit. (yes, I'm WebMonkey).An LS swap won't fix your brake or ambient temperature dilemma but it will make you care about them a whole lot less.
-
SquareRoot replied to the thread Need help identifying sloppy driveshaft/diff play!.Ring/pinion and/or carrier bearing worn out.
-
Sorry boss. I just have a '79 2wd 3/4ton that is stock height with a big block. But it wears a set of headers designed for a 1968-1972...
-
SquareRoot reacted to BigT's post in the thread Changing gear ratios: opinions/suggestions wanted!! with Like.
Right on!!
-
SquareRoot replied to the thread Changing gear ratios: opinions/suggestions wanted!!.This thread is a rabbit hole. lol. Having done about 95% of what everyone has suggested I can tell you what I settled on. But as was...
-
-
SquareRoot replied to the thread Anyone running Wilwood clutch master.Why not keep it simple and use OEM replacement parts? I got the master, slave and hose from Rockauto. Price was pretty cheap actually...
-
THAT'S IT???????....only 2 pics??........more pics..............you're what we used to call some girls in high school........... A PR!CK...
