SquareRoot's latest activity
-
SquareRoot reacted to bucket's post in the thread WANTED: drivers fender color matched for my 89 burb with
Like.
Don't temp me... I'll go bump some old stuff of mine. If you make it a contest, I can win this :rofl: -
SquareRoot replied to the thread WANTED: drivers fender color matched for my 89 burb.A bump on a 4 year WTB request is quite impressive.
-
SquareRoot replied to the thread Quickchange Rear Ends for Square Bodies.QC's are sexy as hell. And, easier to spell QC correct than "aXLe".
-
SquareRoot reacted to legopnuematic's post in the thread To remove or not to paint frame? with Like.
On my 79, I had the frame blasted as a unit, as having it be a roller was important at the time, then I disassembled it, cleaned the...
-
SquareRoot replied to the thread Rear shackle angle.Lol. I was just looking at the photos again and I agree because of the springs arch. I went thru something similar on my D60 on the...
-
SquareRoot replied to the thread Rear shackle angle.So now when the spring compresses the shackle moves forward. In doing so, it's gonna lift the truck because of the pivot point location...
-
SquareRoot replied to the thread Lock ring repair on a steel tank?.^^^^^^^^X2 on "hashed".
-
Just letting you know. I replaced a small leaky hose from pump to box. Topped up fluid and my brakes and steering are back. But you're...
-
SquareRoot replied to the thread Heavy vibration at highway speed under load.If it doesn't have much engagement and there is any wear on the splines that will also cause an issue. My unseated bearing resulted in...
-
SquareRoot replied to the thread 1985 Long Bed Floor and Bedsides.@legopnuematic Thank you sir, exactly what I needed to know.
-
SquareRoot replied to the thread 1985 Long Bed Floor and Bedsides.I have questions on how you separated the pieces. Are they all bolted together or is there any cutting flanges/spot welds to separate them?
-
SquareRoot replied to the thread CARBURETOR DATED.Our Dear Friend Paladin is telling me to say something about a.........Holley. :waytogo:
-
Piece of trash in the cylinder Dry cruddy grease in the rack assembly Broken rack Bent ignition rod Worn out/damaged switch Combination...
-
SquareRoot replied to the thread This one needs to go, asking for opinions. Offering it up here first..Uh ohh
-
SquareRoot replied to the thread Heavy vibration at highway speed under load.It's gotta be a wear item if it just started. Bearings or bushings. I had a very similar issue that took me months to figure out. A...
