SquareRoot's latest activity
-
SquareRoot replied to the thread Aftermarket EFI and dual internal pump tanks.That would be difficult because the OEM harness doesn't have any provision for dedicated 12v wires for electric pumps. -
SquareRoot reacted to Hunter79764's post in the thread Aftermarket EFI and dual internal pump tanks with
Like.
I've got no input on the tank selector valve, but x2 on the info about regulators controlling the system pressure, not just what comes... -
SquareRoot reacted to bluex's post in the thread Aftermarket EFI and dual internal pump tanks with Like.
System pressure is the same regardless of where it's regulated. Pressure is a measure of system restriction, yes the pump is capable of...
-
SquareRoot replied to the thread Aftermarket EFI and dual internal pump tanks.If you're regulator is set at 43 or 58 psi, that's the max pressure any part of the system will see. It will only go above that if you...
-
SquareRoot replied to the thread Aftermarket EFI and dual internal pump tanks.There's no possible way it's pulling from one tank and returning to the other unless your lines are crossed. Not physically possible. I...
-
SquareRoot replied to the thread Aftermarket EFI and dual internal pump tanks.Yes. Zero issues.
-
SquareRoot replied to the thread Aftermarket EFI and dual internal pump tanks.But..... misspell axle and it's game on!
-
SquareRoot replied to the thread Aftermarket EFI and dual internal pump tanks.I had a bad experience with Sniper. The Holley forum had a lot of others with issues. I realize not everyone has issues, there are bad...
-
SquareRoot replied to the thread Aftermarket EFI and dual internal pump tanks.What makes this different than my dual tanks, in tank pumps and pollack 6 port valve?
-
SquareRoot replied to the thread Welding on Strut housings.Don't make me start a new thread called "Darwin Awards"
-
SquareRoot replied to the thread Welding on Strut housings.Please record the event and report back. Waiting in anticipation...:popcorn:
-
Apparently the vapor from a high pressure leak can be flammable, but other than that, it's hard to make it burn. Putting hydraulic oil...
-
SquareRoot replied to the thread Major rust repair 91 burban 1500.Who cares? Look at that beauty!
-
SquareRoot replied to the thread TH 400 needed.A 700 behind a 383. Hopefully a good one :laughing1:
-
84 wiring diagram first number is wires size- it's in mm don't forget about the fusible links- THERMO HW on the red wires if those...
