squaredeal91's latest activity
-
squaredeal91 replied to the thread 2 post shop lift.Have this crane and seriously considering sticking it in the corner to use for pulling engines and other things. If it didn't bend near... -
-
The pan holding 6 qts and the filter holding 2 qts nets a 8 qt capacity ...
-
Back to the oil pan .. Being I'm using a boat oil pan that allows for a great deal more oil capacity over the stock oil pan and the need...
-
I have Summit Headers on the C10. I found the flanges to be nice and thick and the fit was perfect. The tubes appear to be high quality...
-
Fwiw, the Hookers on my 76 are their ceramic coating, and looked like yours. They were on my buddies blazer first, and only a couple...
-
I have the ceramic coated ones on my 85 K-10. The coating is not the best. The headers themselves are not bad quality. I don't have the...
-
Hello Everyone this is my second wife. She's a 89 Silverado K5 Blazer, Gun metal gray paint, restored black interior, power window and...
-
I have a small red edelbrock on my 84 and actually like it. I have it ran next to the tank and switch on and off also a inline fuse. I...
-
squaredeal91 reacted to bucket's post in the thread OEM cylinder head castings - 1977 K10 with
Like.
Depends on what engine. If a 350 or 400, they likely would have been an 882 head. -
squaredeal91 replied to the thread Electric fuel pump.I haven't seen any kits but basically you only need some Allen/ hex set screws and a couple thread taps and that's it.
-
If you are using a qjet,its likely the gas is draining from the carb thru the well in the bottom of the carb.the aftermarket used to...
-
you need a pump near the tank that also doesnt have a check valve, since you need it to function with your mechanical pump most of the...
-
This hi-buck tool will come in handy as t*ts on a milk cow opening up the bowls for the oversize valves ... I'm here to tell ya ! Some...
-
squaredeal91 reacted to Dr_Snooz's post in the thread Let's see those 4x4 Squares On Dirt! with Like.
Pismo Beach! Oceano Dunes! My driveway!!!! Lol
-
I have a set of their ceramic coated on my C10, but is lowered and for a Chevelle for more ground clearance. FWIW, good quality. Nice...
