squaredeal91's latest activity
-
squaredeal91 replied to the thread Instrument cluster swap from Idiot lights to full gauges K5 K10 K20 K30 C10 C20 C30.I want to do this myself. Restore a cluster and add a tach -
squaredeal91 reacted to TDoc's post in the thread Instrument cluster swap from Idiot lights to full gauges K5 K10 K20 K30 C10 C20 C30 with
Like.
Here’s what my instrument cluster plug looks like after repining it from idiot lights to gauges. This is with the large fuel gauge next... -
squaredeal91 reacted to TDoc's post in the thread Instrument cluster swap from Idiot lights to full gauges K5 K10 K20 K30 C10 C20 C30 with Like.
All gauges are working! I also ordered a small fuel gauge and large factory tachometer. Once that arrives I’ll post a pic. Important...
-
I added it along with the small fuel gauge. Might as well go big since I was already swapping from idiot lights to gauges. I did a...
-
squaredeal91 replied to the thread Gauges Paint.I just noticed your tach. Lucky!
-
I mixed about 3-4 drops of red above and adding bright orange until I got it really close.
-
squaredeal91 reacted to Ricko1966's post in the thread Project is stalled. Cannot solve brake problem with Like.
There is a hole in the master cylinder,sometimes there is spacer in that hole also. The brake booster has a pushrod that fits in that...
-
squaredeal91 reacted to fast 99's post in the thread Project is stalled. Cannot solve brake problem with Like.
When bench bleeding a master do not bottom out the piston. It is possible to cut one or more cups doing so. Are the caliper bleed screws...
-
squaredeal91 reacted to Ricko1966's post in the thread Project is stalled. Cannot solve brake problem with Like.
Did you adjust the brake booster pushrod properly? Not the rod from the pedal to the master,the one in the booster that pushes on the...
-
squaredeal91 reacted to Peter coppola's post in the thread Project is stalled. Cannot solve brake problem with Like.
Hello all. Answer to all the questions: 1. New vacuum booster so diaghram is new 2. Rear brakes adjusted properly and parking brake is...
-
squaredeal91 replied to the thread GMC-IH.That is so B@da$$ ^^
-
Got a bit of work to do with installing guides (Going from 3/8" O.D. to 11/32") and oversizing the valves (From 2.06" in and 1.72" ex to...
-
squaredeal91 reacted to jh86's post in the thread Project is stalled. Cannot solve brake problem with Like.
Did you bench bleed the master cylinder? I just did the entire brake system on my 86 a couple months ago with almost identical part...
-
squaredeal91 reacted to legopnuematic's post in the thread Project is stalled. Cannot solve brake problem with Like.
Are the rear drums adjusted correctly?
-
squaredeal91 reacted to Craig Nedrow's post in the thread Project is stalled. Cannot solve brake problem with Like.
Is this vacuum canister, or upgraded to Hydra-boost. If vacuum canister, is the diaphragm good? You have plenty of vacuum for a...
