Ryanbrown36's latest activity
-
I’ve recently completed my Sbc swap and just threw a new carb on it and it fired right up but was running a little rich, I went out... -
Ryanbrown36 replied to the thread Hydro boost brakes awful sound after finishing motor swap.Oh ok, mine only ever had one line off so wasn’t much air. Mine was almost a grinding noise but slowly went to a whistle and now...
-
Ryanbrown36 replied to the thread Hydro boost brakes awful sound after finishing motor swap.Is yours almost a grinding noise or a whistle?
-
Ryanbrown36 reacted to jwconnelly's post in the thread Hydro boost brakes awful sound after finishing motor swap with
Like.
I am troubleshooting mine for the same thing. Replaced the hydrbooster, all lines, power steering pump, and master cylinder. Spent... -
Ryanbrown36 replied to the thread Hydro boost brakes awful sound after finishing motor swap.I didn't get around to doing a proper bleed tonight but while messing with the carb and had it running for a while I took the cap off...
-
Ryanbrown36 reacted to PrairieDrifter's post in the thread Hydro boost brakes awful sound after finishing motor swap with Like.
A "dry" fluid pump will make very many noises. Pretty loud usually too. Haven't you heard all of the 90's-2000's fords whining...
-
Ryanbrown36 reacted to Rustisbest's post in the thread Holley street warrior 600cfm for sbc 355? with Like.
The castings might be. But they're assembled in Bowling Green
-
Ryanbrown36 reacted to MikeB's post in the thread Holley street warrior 600cfm for sbc 355? with Like.
I'm not a fan of electric chokes at all. I think the best-ever were the stock ones from the 60s, where they were controlled by intake...
-
Ryanbrown36 replied to the thread Holley street warrior 600cfm for sbc 355?.Well that’s good news! Will have to see how it works out, doesn’t need to be a crazy hot rod anyway just want a good runner with a...
-
Ryanbrown36 reacted to Rustisbest's post in the thread Holley street warrior 600cfm for sbc 355? with Like.
Still has the gold zinc linkage so it's old stock and probably has the good choke too.
-
Ryanbrown36 replied to the thread Holley street warrior 600cfm for sbc 355?.I ended up buying the carb anyway due to the steal of a price I got it for, so will see how it preforms, worst case I can sell it for at...
-
-
Ryanbrown36 replied to the thread Holley street warrior 600cfm for sbc 355?.Thank you for the input, I did notice the drivers side inlet which isn’t the biggest deal but is definitely inconvenient for making...
-
Ryanbrown36 reacted to MikeB's post in the thread Holley street warrior 600cfm for sbc 355? with Like.
The 80457 is a decent carb. I bought a refurbished one (which was essentially new) many years ago from Holley's eBay store. The engine...
-
Ryanbrown36 replied to the thread Hydro boost brakes awful sound after finishing motor swap.Thank you, will try this tomorrow when I’m off school
-
Ryanbrown36 replied to the thread Hydro boost brakes awful sound after finishing motor swap.I haven’t tried yet, the truck was running with the diesel and everything worked properly until I did the swap so air would definitely...
