Ronno6's latest activity

  • Ronno6
    Ronno6 replied to the thread Leaking Metal Fuel Line??.
    Am I safe to use regular fuel hose along the frame rail from selector valve to fuel pump, or do I need to use something shielded?
  • Ronno6
    Ronno6 replied to the thread Leaking Metal Fuel Line??.
    There is a metal clamp on the frame rail side just ahead of the tranny cross member........... Seems to be the forward...
  • Ronno6
    My -84 C-10 is leaking gas along the frame rail between the pump and the tank selector valve. It seems improbable to me that it has a...
  • Ronno6
    Ronno6 replied to the thread Down 1 Cylinder.
    Upon further investigation, header pipes for cyls. 2.6.and 7 are very cool after a 30 second run... Dunno what's up.......... Carb is a...
  • Ronno6
    It has been a long time since I have had to do any engine diagnosis... I built my 355 out of a 95 pickup. It has sat for some time..like...
  • Ronno6
    I am curious about the fuel return line on a mechanical pump. I have read that the return system is designed to keep fuel moving to...
  • Ronno6
    Ronno6 replied to the thread EFI Return Line Size.
    Upon re-reading their installation instructions, no requirement is stated regarding return line size. Dunno where my thoughts on that...
  • Ronno6
    Ronno6 replied to the thread EFI Return Line Size.
    I'm not even sure why a return line from the Force Fuel tank is necessary with the return line from the mechanical pump.....
  • Ronno6
    I have purchased a Fitech TBI fuel injection system for my 84 C-10 with a 1995 350. The EFI will use their Force Fuel system, a tank fed...
  • Ronno6
    Ronno6 replied to the thread Dual tanks; NO fuel.
    Well, after all is said and done, I guess it IS possible to have 2 empty gas tanks......... I added fuel to 1 tank and intermediately...
  • Ronno6
    1984 C-10 Scottsdale 350 currently with carb.. Gonna install Fitech TBI EFI.........IF: Truck quit running, I switched tanks (valve...
  • Ronno6
    Excellent... thanks!
  • Ronno6
    Can anyone please tell me the thread and length of the 3 screws that mount the wiper motor in a 1984 C10 Scottsdale?
  • Ronno6
    Ronno6 replied to the thread Gas Gauge Off The Deep End.
    Alrighty, then............ Now I have my left tank reading empty (it has a few gallons in it.....) and the right tank off scale full...
  • Ronno6
    1984 C10 dual tanks. New tanks, at least 1 new pickup/sender. Just installed gauge cluster after 2+ years. Gas gauge travels WAY past...

Forum statistics

Threads
45,423
Posts
983,008
Members
38,445
Latest member
romeyrome
Top