Ricko1966's latest activity
-
RRicko1966 reacted to Vbb199's post in the thread Lost Two Gen 3 LS Engines in my 1986 C10 2WD with
Like.
I saw somewhere the same injectors/rail is being used. Thats what im blaming. Try a new set of them or test them! -
RRicko1966 replied to the thread Lost Two Gen 3 LS Engines in my 1986 C10 2WD.You absolutely can do a compression test on a junkyard motor,sitting on the ground at the junkyard. I've run SBCs sitting on the ground...
-
RCool story! Good luck!
-
RRicko1966 reacted to legopnuematic's post in the thread New Hinge Alignment with NO Reference Marks with Like.
This is for a 70s truck, if you look in an 80s service manual (pdfs available on the forum here) it should have it with any changes made...
-
RRicko1966 replied to the thread 305 to 454 swap.#3 did that.
-
RRicko1966 replied to the thread Accel HEI Super Coil (140003) Magic or Trash.Well time to give credit where credit is due. I got specs finally for a streetfire,and it should be adjustable enough for 99 percent of...
-
RRicko1966 replied to the thread 350 High Inconsistent Idle.A quick squirt with carb cleaner well usually find a vacuum leak quick and easy. Hey @legopnuematic remember last week when we were...
-
RRicko1966 replied to the thread Finally got a running 65 C10.This might be interesting considering how many times I've pulled the keepers with a magnet. I can just see the valve held up and 32...
-
RA magnet on a stick might be enough to have it stuck on the end of the valve stem and keep the valve held up to slip the retainers on...
-
RRicko1966 replied to the thread Finally got a running 65 C10.Or an old plug wire. Remember for break in you want light springs.
-
RI used rope when I did valve springs on my slant six and worked fine, stuff it in and rotate crank slowly until it holds the valves up...
-
RRicko1966 replied to the thread Bent fuel pump rod.The short one won't hold it you remove the short one put in a long one,change the pump remove the long one,put the short one back.
-
RLots of things are wrong with me. You should know that by now :rofl:
