Ricko1966's latest activity
-
Rhaving weird issues with your TBI? before getting out the parts cannon, follow this advice from the GM Drivability manual before you...
-
RDon't think any body is crying about anything you are doing. Just hard to watch some one spend dollars. Your truck , your money, carry on
-
RUntil you release the lever it's sealed. I don't get what you're saying. The surge tank is vented anyway. So, unless the owner let the...
-
RRicko1966 reacted to RattleSnack's post in the thread 5.7 back fires through carb but timing is good. with
Like.
Before you tear into it, maybe you could try this... Take the distributor cap off so you can see the rotor. Then, try to rock the... -
RRicko1966 reacted to RattleSnack's post in the thread 5.7 back fires through carb but timing is good. with Like.
Looks like you tried all the usual suspects... Did you double-check your spark plug wires? Maybe you got some mixed up. My next guess...
-
RI would get a back tap/chaser from a local auto parts store over using a cut tap to chase the threads. Especially over a cheaper cut...
-
RRicko1966 replied to the thread Gas tank installation help please.I can do them by myself,no jack if they are empty. If you are using new tanks new straps new brackets leave the straps just barely...
-
RRicko1966 replied to the thread 6 port selector valve help.And not saying axel.
-
RGot it solved. To answer your question though, I have two pumps, one for each tank. One is the original stock one in stock...
-
RRicko1966 replied to the thread Gas tank installation help please.I leave my hoses long and attached at the tank with clamps,with a second set of clamps loosely in place I pushup the tank,fish my hoses...
-
RRicko1966 reacted to legopnuematic's post in the thread Best way to transport 19 55 gallon barrels? with Like.
Unless you are aiming for a record on the 1/4 mile, I agree it shouldn't be that light... Seeing the title of this thread pop up...
-
RRicko1966 reacted to DoubleDingo's post in the thread Best way to transport 19 55 gallon barrels? with Like.
You have waste oil, get a hudson sprayer and coat the undercarriage
-
RTake off the distributor cap and rotor, make sure the advance weights are free to move and return to their resting spot. If you adjust...
-
RWhen I bought Crusty Biscuit the PO had installed an avs2 on it. I was constantly readjusting it. Since I had a spread bore intake and...
-
RIt's unlikely that you are actually getting vapor lock with the symptoms you are reporting and the equipment you have. If it was vapor...
