Ricko1966's latest activity
-
RWhen HEI first came out, the modules did have some reliability issues. It didn’t take long for Delco to figure it out and solve the...
-
RRicko1966 replied to the thread Accel Plug wires too short.4048s are listed as an over the Valve Cover set. 4049 I got a screenshot of the wire lengths,if you have your old ones to measure. I...
-
-
RRicko1966 replied to the thread Spark plug foul up.Hi! So does your timing advance? Are you burning oil?
-
RRicko1966 replied to the thread TBI distributor 454/7.4L.I'd make a bushing,either make the OD .0005 to big or the ID .0005 to small,use heat and a freezer to put the 2 together. Meaning if the...
-
RLike that idea. I think @Ricko1966 had recommended putting an aspirin or Tylenol tablet in the thermostat to prop it open for complete...
-
RRespectfully disagree, had that problem on one of my trucks. Drove me nuts until I figured it out. Water pump pully diameters were not...
-
RRicko1966 replied to the thread HEI module dwell time..Computer heat sink paste. So,your local computer shop
-
RRicko1966 replied to the thread Power Steering Squeel.One thing you are missing is the difference in torque multiplication from a quick ratio box to a standard box.The power steering pump...
-
RRicko1966 replied to the thread Bubbling feel of throttle at low RPM.Make sure the distributor cap is on square and tight with all the hold downs in place. Make sure the wires going to the distributor cap...
-
RRicko1966 replied to the thread Lost ignition!.If you have access to any other GM keys try them all wiggle jiggle twist jiggle,sometimes you get lucky and the key and tumblers are...
-
RRicko1966 replied to the thread Bubbling feel of throttle at low RPM.LS swap, your turn.
-
RRicko1966 replied to the thread Seat Install.They won't hurt it.
-
RI’m sorry for not getting back to this sooner. My wife and I went on a camping trip in the upper peninsula of Michigan and had...
-
RRicko1966 reacted to Old Guy Bill's post in the thread Replace seals on power steering gear box on truck or bench? with
Like.
Inspect it carefully. This is what I found on mine. -
RIf you are not using a GM module in your HEI distributor then there is a good possibility your dwell time is not correct thru the entire...
