Rickf's latest activity
-
Rickf replied to the thread 6.5 turbo swap with a/c.Not going to fit with the stock a/c box, plus with the stock turbo exhaust manifold's down pipe won't clear the frame and or cab... -
Rickf replied to the thread What year box do I have?.The bed of my '74 has 5 bolts vertically holding the side to front panels. There are 2 fairly close together at the top next to the...
-
Rickf reacted to Strick's post in the thread Clutch cover and flywheel damaged out of the box? with
Like.
Much can happen on that 10K trip from China to you. Looks better than the next you'll get (probably). I'd run it. HS -
Rickf reacted to 77Dmax's post in the thread Clutch cover and flywheel damaged out of the box? with Like.
I would run that and not think twice about it.
-
Rickf replied to the thread What year box do I have?.My '74 has round, (exposed gas caps) filler holes.
-
Don't do it,get your long shaft shortened. I'd be worried at full extension the driveshaft will come apart,also if the splines aren't in...
-
Rickf reacted to JD Miller's post in the thread Advice on Rear Differential Leak for 1980 C10 with Like.
Wash off all the crud, dirt, oil. Check the oil level. Look for leaks after the differential is cleaned
-
Rickf replied to the thread ‘87 454 R20 eye watering exhaust w/ windows down.Just curious, have you pulled and looked at the spark plugs?
-
That's definitely a ground issue imo. Two headlight grounds on each side of the core support. Make sure the ground from the firewall to...
-
Chevrolet engineered designed rust collectors
-
Rickf replied to the thread Distributor will hit edelbrock 3764 intake.Are you not able to set the ignition module on the other side of the post?
-
There are (or were) bleeder wrenches made specifically for that application. We had a thread about that several years back I think. I...
-
These are what I used. Bleeder should be 5/16 or 8 mm. Sometimes a long combination will work. If tight will need a box end wrench...
-
Hi, I'm looking to re-wire my truck from scratch because the stock wiring has been chopped and added to so much I figure it would be...
-
Rickf replied to the thread '84 K20 Suburban re-wire.The HEI wire on a gas harness can be used to activate the diesel injector pump. It probably needs to be a bit longer and there may be a...
