peats's latest activity
-
POur's are Dashes Direct, looks like we've got one left in stock as of this writing. They fit great, I've put a couple in with no issue...
-
Ppeats reacted to 77Dmax's post in the thread Big block running hot. Can’t figure out the issue with
Like.
In a serp setup any pulley that is turned by the smooth side of the belt is spinning opposite of the crank, any pulley that is spun by... -
Pseal 'em from what? Ive put grease or anti seize on 'em to keep from rusting stuck and breakin' off when removal time comes
-
Ppeats replied to the thread TH350 Removal.I don't know if you had the opportunity this time ,but I always degrease the work area before diving in.
-
PEggs were 4.50 a month ago now 2.59. Remember when gas was almost 4.00 a gallon? Motor oil? Dollar Tree used to be a dollar,now it's a...
-
PWelcome to Bindenomics
-
Ppeats replied to the thread Engine stumbling/stalling in drive.You might want to experiment with initial timing. Try backing it off or increasing it 2 deg at a time and drive it for a couple of days...
-
PI doubt you could get a small block to idle that low. Sounds like coolant was partially frozen. Or maybe clamp was not tight enough.
-
Ppeats reacted to Blue Ox's post in the thread Anyone else have this "Turbo Diesel" plaque? with Like.
@TheBigBlue2500 I'd suggest you check your exhaust for a harmonica or the whistle that came with the Turbodiesel badge, because there is...
-
POr it could be the gauge failing. Without knowing your actual mileage, it's impossible to know if you have an actual issue or not
-
Ppeats reacted to 77Dmax's post in the thread Changing gear ratios: opinions/suggestions wanted!! with Like.
The OD ratios in the newer 6, 8 and 10 speeds are not much higher than what was offered in the 80s. I'm not here to argue but turning...
-
Ppeats reacted to 77Dmax's post in the thread Changing gear ratios: opinions/suggestions wanted!! with Like.
Despite popular belief turning 3k on the highway is not a problem. Hell I've turned 3800-4000 for hours on end...
-
P:laughing1:10-12 like every squarebody ever.
-
PGrinders and paint make me the welder I ain’t.
-
P^^^^ sorry I meant 89 he's not LS swapped yet.
