Old Guy Bill's latest activity
-
Old Guy Bill reacted to Vbb199's post in the thread 87 tbi 350 popping at idle and running rich with
Like.
For the guy insisting OP get a cable and computer - You're part of the reason people just rip the TBI off and replace it for a carb... -
Old Guy Bill reacted to Ricko1966's post in the thread 87 tbi 350 popping at idle and running rich with Like.
If you want to test the sensors and do not have access to a scanner with data logging. Find your coolant temperature sensor unplug...
-
Old Guy Bill reacted to Redfish's post in the thread 87 tbi 350 popping at idle and running rich with Like.
From personal experience with an '87 TBI... You can run a few degrees of advance on the timing. I was somewhere around 8 degrees until...
-
Old Guy Bill reacted to Ricko1966's post in the thread 87 tbi 350 popping at idle and running rich with Like.
I turned wrenches for a long time too 40 years give or take. You're right if it's intermittent he's probably not going to find it with a...
-
Old Guy Bill reacted to legopnuematic's post in the thread 2005 Ram 2500 Free Spin Install & Other Goodies with Like.
Cleaned the tapers out and installed knuckles on ball joints per EMF's directions. Couple of dings on the spindles. I'll be honest not...
-
Old Guy Bill reacted to NickTransmissions's post in the thread 700r4 slipping in cold weather with Like.
Again, what are the results of your pressure testing? Stop guessing and do a pressure test so you know exactly where you stand. Let us...
-
Here is a quick cad drawing I did to see, 5x5, 6x5.5, 8x6.5. Should be correct but it is late and I'm tired. All holes are drawn as a...
-
Old Guy Bill reacted to Ricko1966's post in the thread Project is stalled. Cannot solve brake problem with Like.
I'm home now,I drew you a sketch slip your bracket over the existing pin and clamp it to your pedal. Than post back telling us your...
-
Any paint and body supply can match it. But I’ll throw out another plug for Tamco paint. Still a great value. That said, @Stormhawk...
-
The ideal thing would be to find a paint shop/body shop that has the little scanner thing they can scan your existing paint with and mix...
-
Old Guy Bill reacted to TotalyHucked's post in the thread What have you done to your square lately?? with Like.
Forgot to post a picture Thursday. Loaded up a bunch of weight in the back just in case since this is my driver while my Z71 is down...
-
Old Guy Bill reacted to Turbo4whl's post in the thread LE9 305 w ESC Performance upgrades '86 k5 Blazer with Like.
^^^ BOOST^^^ When you think about newer vehicles, they mostly have smaller displacement engines. So how do they have enough power...
-
Old Guy Bill reacted to Ricko1966's post in the thread LE9 305 w ESC Performance upgrades '86 k5 Blazer with Like.
More work than you want to do just to satisfy curiosity.. cast into the head by the rocker arms underneath the valve covers. Seriously...
-
Old Guy Bill reacted to CountKrunk's post in the thread 2.73:1 Rear - Do I have a chance in hell to...... with Haha.
That plus a junkyard quadrajet will get it done
-
Depends on what you are going to do with it. Wheeling? Shorten the frame.Towing and hauling?Leave the frame long.
