Old Guy Bill's latest activity
-
Old Guy Bill reacted to Craig Nedrow's post in the thread Help with starting 79 k20 400SBC with
Like.
Pull #1 spark plug out, have someone turn the motor with you plugging the spark plug hole with your thump, on the outside, no finger in... -
Old Guy Bill reacted to SquareRoot's post in the thread Electronic Shift NP203/NP205 Doubler with Like.
Shift levers are manly. Push buttons are not.
-
Old Guy Bill reacted to legopnuematic's post in the thread Big block running hot. Can’t figure out the issue with Like.
The reverse rotation/standard rotation pump thing is just the impeller mirrored as the serpentine setup spins the pump the opposite...
-
Here's a reason I wouldn’t,I learned a long time ago with performance automotive,there has to be a weak link. I pick cheap easy weak...
-
Been working on this 85 for a year now. Started out as a 2500. Swapped body and drivetrain over to a SWB 1500 frame. Just need a vision...
-
I seriously doubt it's either switch. And before I replaced one even if I suspected it I'd test it. Where I'd start is unplug all 4...
-
Old Guy Bill reacted to ChuckN's post in the thread What have you done to your square lately?? with Like.
Let the meds clear from my brain, and took the truck out for a cruise. Turns out that a bench seat is really comfy to slide in and out...
-
Old Guy Bill replied to the thread LMC Dash Pad Supplier.I just got a Dashes Direct unit from Jeggs, it was reduced.
-
Old Guy Bill reacted to Grit dog's post in the thread Changing gear ratios: opinions/suggestions wanted!! with Like.
You have a 2wd so options are much cheaper/easier/more numerous than 4wd. The swap I’ve been thinking about but can’t wouldn’t do due...
-
Old Guy Bill reacted to bucket's post in the thread Changing gear ratios: opinions/suggestions wanted!! with Like.
I don't understand why everyone says they can't keep up with modern traffic. Why the heck not? Just get on the skinny pedal and let it...
-
Everyone has their own way but I get all 6 from the bottom and support the engine so the distributor doesn't hit I do pop the cap off...
-
Old Guy Bill reacted to TotalyHucked's post in the thread NEW Brothers Dash Bezels - CHEAP with Like.
Holley purchased Brother's a few years back, Brother's only exists in a name now. Last I heard, they'd shut down the call/tech center in...
-
Old Guy Bill reacted to Ricko1966's post in the thread Thoughts on how to recover from a slightly cross threaded spark plug threads in head? with Like.
Grease on the chaser should collect the chips. I do start them with no plug in them though for just a second.
