NickTransmissions's latest activity
-
NickTransmissions replied to the thread Th400 Torque Converter Shaft Seal.Check the pump bushing once you have the front seal off. If it's excessively worn, trans would have to come out so it can be replaced. -
NickTransmissions replied to the thread 350turbo out 700r4 in expected cost?.2WD or 4X4? Also, are you doing the physical swap or outsourcing it? Figure $150-300 for a cut/balance of the driveline by a driveshaft...
-
NickTransmissions replied to the thread TH350 Plug Question in case.Nice, thanks @quicksilver702. Reach out to me off-line if you run into any problems with the build...Since we are in the same city (I'm...
-
NickTransmissions reacted to quicksilver702's post in the thread TH350 Plug Question in case with
Like.
Sure thing! -
NickTransmissions replied to the thread TH350 Plug Question in case.Nice...Please post some pics of the valve line ups and casting itself if you can (no rush)...Curious to see what was done...
-
NickTransmissions replied to the thread TH350 Plug Question in case.You should be able to either drill through it (be very careful if electing to do to this) or perhaps punch it out with a drift by...
-
NickTransmissions reacted to quicksilver702's post in the thread TH350 Plug Question in case with Like.
Yes, it has been heavily modified for manual shifting. There was no governor at all in there. The valve body has been extensively...
-
NickTransmissions replied to the thread TH350 Plug Question in case.Looks like someone may have modified that unit for manual shifting. What does the governor look like? Is the manual low control valve...
-
NickTransmissions replied to the thread Rebuild th400 or 4l80e?.Keep temps under 200 when using non synthetic, all auto transmissions. Run though the radiator then to an external cooler or vise versa...
-
NickTransmissions replied to the thread Rebuild th400 or 4l80e?.Yes - never reuse one way assemblies in any transmission unless you like doing the job twice...While the ones in the TH400s/4L80Es are...
-
NickTransmissions replied to the thread Rebuild th400 or 4l80e?.Then you don't have any sprag OWCs, you only have roller clutch OWCs (low and intermediate), unless someone has been in the unit prior...
-
NickTransmissions replied to the thread Rebuild th400 or 4l80e?.What year is your TH400? It will if the direct drum that came in your TH40 has a smooth race (1964-1970 units have it). If it has a...
-
NickTransmissions replied to the thread Rebuild th400 or 4l80e?.Contact transpartswarehouse.com on Monday and request the intermediate and low roller one way assemblies for your TH400. Specify the...
-
NickTransmissions replied to the thread 700r4 tv cable adjustment.I used that kit once, took seemingly forever to get it all installed, lol. IIRC it used to be called the "SK700-SR". I typically install...
-
I stand corrected, it’s called the TransGo system correction kit. It’s pretty involved, but they do work. I had to use one when I put...
