Nasty-LSX's latest activity
-
Nasty-LSX reacted to Robert Bare's post in the thread Help finding a short, Who's good at ELECTRICAL??? with
Like.
The big fuse on the right is the amp, and is sealed, have to check with a meter or such. Your meter will still work on volts and ohms... -
Nasty-LSX reacted to Ricko1966's post in the thread Help finding a short, Who's good at ELECTRICAL??? with Like.
If you had a meter you could check resistance of the fuses. 0 is good OL is bad. If you do not have another meter,a piece of wire a dome...
-
Nasty-LSX replied to the thread Help finding a short, Who's good at ELECTRICAL???.Cool to know. I have none of that stuff. :cheers:
-
Nasty-LSX replied to the thread Help finding a short, Who's good at ELECTRICAL???.Im going to do that! :happy160:
-
Nasty-LSX reacted to Ricko1966's post in the thread Help finding a short, Who's good at ELECTRICAL??? with Like.
I will once again state it is nice to make a lead for your meter with an inline fuse lower than the meter fuse,cheap,easy to check,easy...
-
Nasty-LSX reacted to fast 99's post in the thread Help finding a short, Who's good at ELECTRICAL??? with Like.
You just made confirmed my case for using a shunt. Very easy to exceed 10 amps. Will add a majority of draws I have seen were caused...
-
Nasty-LSX reacted to Grit dog's post in the thread Help finding a short, Who's good at ELECTRICAL??? with Like.
Ok that’s perplexing! You’re doing it right. Before I replied earlier I went out and checked the 86 that I knew has a parasitic draw...
-
Nasty-LSX reacted to Grit dog's post in the thread Help finding a short, Who's good at ELECTRICAL??? with Like.
K so I was intrigued and looked up the owners manual for that meter and looks like you’re doing everything right, now. You set volts to...
-
Nasty-LSX reacted to Radiohead's post in the thread Help finding a short, Who's good at ELECTRICAL??? with Like.
Unplug the two wire connection on the alternator with everything else as normal and see if the draw goes away.
-
Nasty-LSX reacted to Hunter79764's post in the thread Help finding a short, Who's good at ELECTRICAL??? with Like.
My thoughts went to the alternator as well, try disconnecting it and see if you have an issue that night. I also wonder if your...
-
Nasty-LSX reacted to fast 99's post in the thread Help finding a short, Who's good at ELECTRICAL??? with Like.
Can monitor electric flow while turning items on and off. A MM on amps works similar except you're not limited to 10 amps or whatever...
-
Nasty-LSX reacted to Don Ainsworth's post in the thread Help finding a short, Who's good at ELECTRICAL??? with Like.
My 2 cents. Check automatic choke wiring connection. It may have been accidentally reversed.
-
Nasty-LSX reacted to Grit dog's post in the thread Help finding a short, Who's good at ELECTRICAL??? with Like.
Yes that makes sense. And a shunt is designed to measure large amp flows. I was confused as I wouldn’t consider buying one to find a...
-
Nasty-LSX reacted to Robert Bare's post in the thread Help finding a short, Who's good at ELECTRICAL??? with Like.
I'll throw in a bit- Some led test lights will not work for such a test. Battery should be able to handle an overnight drain of several...
-
Nasty-LSX replied to the thread Help finding a short, Who's good at ELECTRICAL???.Im willing to bet your right. When I first started even before I made a post. I had the MM set up just like in the video on 10A and...
-
