legopnuematic's latest activity
-
legopnuematic reacted to idahovette's post in the thread K5 K10 17x8 or 17x9 vision Cheyenne Aluminum rally wheels? with
Like.
Didn't get the whole post, BUT, your alignment shop is either lazy or they do NOT know how to align a 4wd Square Body! There are a... -
legopnuematic replied to the thread Paint Source for 1983 K20.I'll give another good word for Tamco. Even at a minimum, if you just want to get something laid down to seal it up and preserve it...
-
-
He said it’s silver and black, silver roof. So likely black stripe down the middle. But that’s totally an option. Or if it’s silver low...
-
I don't know how your 2 tone is laid out,but it might be worth photo shopping a white roof on your truck,white would be easy if it looks...
-
With all due respect, you may just be wasting your time with that plan of attack. One of the major culprits of door sag is the door...
-
It looks to me like the focus is in the wrong area here. While the doors may be sagging slightly, the door/fender gap is FAR worse than...
-
legopnuematic reacted to bucket's post in the thread What have you done to your square lately?? with Like.
It doesn't have the bolt-in pinion housing, no.
-
legopnuematic reacted to AuroraGirl's post in the thread What have you done to your square lately?? with Like.
Is the 70HD good? I wonder if it has the pinion support like 14 bolt. Also So from the looks of it, my dad got lucky on the wheels...
-
legopnuematic reacted to bucket's post in the thread What have you done to your square lately?? with Like.
Regular duallies with a truck bed got the wide Dana 70HD model. Cab and chassis models (no bed) got the 14ff, but with a narrower track...
-
legopnuematic reacted to ChuckN's post in the thread What have you done to your square lately?? with Like.
Out in the garage. Found a whole bunch of surface rust under the door frame weatherstripping. Went after it with my corner sander, and...
-
Welcome! My leak was behind the controls. There's a rubber "manifold" that internally fell apart and wouldn't align the doors properly...
-
legopnuematic reacted to Redfish's post in the thread 87 tbi 350 popping at idle and running rich with Like.
I have typed this a few times on this forum so I apologize to those that are tired of reading it. In 1987 there was no internet, there...
-
If the porcelain can be blown out as suggested I would try to drill and tap whats left provided there is access. Use grease on the bit...
-
legopnuematic replied to the thread What have you done to your square lately??.For a 77 or 78 (ish) DRW truck should be a Dana (70hd I believe). From the 1978 vehicle information kit.
-
-
legopnuematic reacted to Turbo4whl's post in the thread Magnetic Block Heaters, Gas Engine? with Like.
No experience with oil pan heaters. I would recommend a tank type coolant heater. Zero Start is a good brand: CLICK HERE
