K5Rob's latest activity
-
KK5Rob replied to the thread 04 LM7 into 87 K5.(Duplicate)
-
KK5Rob replied to the thread 04 LM7 into 87 K5.Right but i *believe* if i use the adapter, i can get my vss signal at the adapter (between transmission and transfer case) - this...
-
KK5Rob replied to the thread 04 LM7 into 87 K5.Vbb I definitely appreciate all the advice. I am mainly trying to avoid any tuning type complications as the tuning portion of the build...
-
KK5Rob replied to the thread 04 LM7 into 87 K5.Thanks CalSgt. The Dakota Digital signal not being good enough is what I found too. So then the Walters piece would take care of the...
-
KWhen I did my 4L60E + 208 combo all of the information I found claimed the Dakota signal wasn’t good enough for the factory PCM to shift...
-
KK5Rob replied to the thread 04 LM7 into 87 K5.All i found when researching was problems getting the 4l60e to work correctly. Maybe just bad tuning?
-
KK5Rob replied to the thread 04 LM7 into 87 K5.Yes it does, good call. So i am wondering now if i should keep the 4L60E or the 700r4
-
KK5Rob replied to the thread 04 LM7 into 87 K5.So if using the 4L60E and NP208, the PCM needs VSS from the transmission, transfer case or both? Would I keep the factory VSS on the...
-
KK5Rob replied to the thread 04 LM7 into 87 K5.Can anyone explain what they did to make their 4L60E work correctly with an NP208 ?? I have searched for weeks and can’t find anything...
-
KIf you drop and drain the pan, there will be very little fluid (if any) that will come out of the extension housing. Same thing with the...
-
KYes… purple wire from bulkhead will trigger the starter solenoid so long as you provide power to the two red wires at the bulkhead...
-
KK5Rob replied to the thread Starter wiring for LS.Sorry I should mention I plan on having VATS removed
-
KPulling the 04 2wd 4L60E out of my donor truck for my K5 LS project. Will I lose fluid from the tailshaft if I drain the pan and...
-
KK5Rob replied to the thread Starter wiring for LS.Thanks guys. I guess what I was getting at was the 87 bulkhead wiring. I want to use the factory key switch. I believe I can use...
-
KWondering if I can just use existing starter wiring to run my LS or is there a reason it needs to come from the PCM? This is on my 87...
