JamesSam's latest activity
-
@JamesSam I never found it in local stores. Not sure why. But you can order it off their website as I mentioned. -
JamesSam reacted to gmbellew's post in the thread What have you done to your square lately?? with
Like.
it is so dark inside the cab of these old rigs, and I could never see the cupholders on the center console of the suburban. One good... -
JamesSam replied to the thread Oil Pressure Drops After High RPM.Thanks @ChuckN ! Awesome chart. @WFarm Paul, I am interested in the Amsoil Z Rod oil. Do you know if this is in any of the auto parts...
-
JamesSam reacted to Ajax19's post in the thread What have you done to your square lately?? with Like.
Sweet thanks, also happy Thanksgiving to everyone
-
JamesSam reacted to mcarlo86's post in the thread What have you done to your square lately?? with Like.
Hubcaps are interchangeable between 16" and 16.5" wheels.
-
Yes! That stuff looks good. I’ve never seen it locally but have wanted to run it. The local shops have started carrying VR1 synthetic so...
-
Great chart! The Speedway Motors website also discusses the Amsoil products but don’t see them on the chart. The Z-Rod line is...
-
Yeah, I get that but time for something thicker and with a high zinc content for your cam and lifters. I’ll post a picture below of a...
-
JamesSam replied to the thread Oil Pressure Drops After High RPM.I have been running 5 W30 ever since I got the truck only because that is what the PO had been using. I believe I will be switching it...
-
JamesSam replied to the thread Oil Pressure Drops After High RPM.Thanks @ChuckN Chuck! I wish I could pick you up and take you for a ride so you could see and hear it all in person with me. My...
-
I run rotella t4 which is 15-40
-
Cut the oil filter open. If it’s clean of metallic debris, put a mechanical gauge on it to verify the oil pressure. If it’s still low...
-
Man, good call- I don’t think I’ve ever seen an oil that low in viscosity with high zinc content (unless added afterward with Lucas...
-
Were on the same page. Actually, most 5-30 oils shouldn't be used with flat tappet cams, additive package is wrong.
-
Low knock at idle,with low oil pressure,is usually main bearings. Put a good mechanical oil pressure gauge on it to confirm readings I...
