JamesSam's latest activity
-
JamesSam reacted to Goldie Driver's post in the thread What have you done to your square lately?? with
Wow.
What I did was discover a brake issue on the way in to work this morning . At work I discovered my aftermarket PV2 proportioning valve... -
Just ignore what the websites say (and even the salesman at the counter) about it "not fitting" your vehicle. Even with newer stuff...
-
What DD said. Some came with that large, depends on how the truck was ordered, but the size you have is one of the most common today, I...
-
Most likely came with 9.5-16.5 tires, and someone switched to 16 inch rims and 235/85/16 tires. Nothing wrong except the computers...
-
I have this 1981 K30 dually and it currently has 235/85R/16 tires one it. When I search that tire size multiple vendors state will not...
-
Welcome from Eastern Oregon
-
JamesSam replied to the thread Help With Parking Break Dash Light Staying On.I crawled under and put more tension on the cable at the bracket where the lines split to both rear drums and it has turned the dash...
-
JamesSam reacted to 75gmck25's post in the thread Help With Parking Break Dash Light Staying On with Like.
Check the small switch on the parking brake pedal mechanism. It may be broken, or not screwed on tight. Proportioning valve can also...
-
JamesSam reacted to Robert Bare's post in the thread Help With Parking Break Dash Light Staying On with Like.
Look at the picture. You need to make sure all the parts are there, especially the 3 links from the cables to the frame. Missing one...
-
JamesSam replied to the thread Help With Parking Break Dash Light Staying On.@Robert Bare and @grummy ets just say I cannot solve this by fooling around with the release lever and break pedal in the cab, which I...
-
JamesSam reacted to Robert Bare's post in the thread Help With Parking Break Dash Light Staying On with Like.
Your rear cables should be adjusted so they pull the pedal clear up to and on the rubber bumper. Don't know if I have ever seen a pedal...
-
JamesSam reacted to grummy's post in the thread Help With Parking Break Dash Light Staying On with Like.
If you do pull on the park brake release and lift up on the pedal and the light goes off, you probably just need to tighten up your...
-
JamesSam replied to the thread Help With Parking Break Dash Light Staying On.I have to do that every time. Lifting up on the pedal only works until I let go of the pedal now, if you know what I mean. I will try...
-
JamesSam reacted to PrairieDrifter's post in the thread Help With Parking Break Dash Light Staying On with Like.
Many of the trucks have experienced this. Simply a sloppy parking brake pedal assembly. A farmer favorite is wire it tight to the...
-
JamesSam reacted to fast 99's post in the thread Help With Parking Break Dash Light Staying On with Like.
Have seen the emergency brake assemblies so worn they will not return properly. Un plug wire on top light should go out. Can also do the...
