hey mister's latest activity
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.Why not just get a gal can of the carb cleaner? And while at the parts house, pick up a pack of brushes and hit the head shop and get... -
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.I use a heat gun to dry out all the moisture hiding. But never ever spray any lube anywhere. Not even WD40. Nada!
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.If the factory plugs look intact, I don't monkey with them. If they leak, I can machine new plugs and use a polyester epoxy to seal. My...
-
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.There is a method to the madness. But I find it sorta relaxing.
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.Years ago when I was playing with motorcycle carbs, I found a small parts washer. I have a couple gallons of Berryman carb cleaner in...
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.Heh..just fyi.. I called Cliff this morning and left a message. He called back in about 15 minutes and we yacked almost an hour. You can...
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.Hard to say what Cliff is up to. I think he is getting long in the tooth. Maybe he went to limited hours. Or maybe he's just so busy he...
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.Update: Using a Dremel type tool and a blue mounted stone, the staked part of the screws was dressed off. That done the screw easily...
-
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.I am near Akron, Ohio. How about you?
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.Oh,...ok. I was a tad puzzled as to the intent. Thanks for the clarification.
-
hey mister replied to the thread Quadrajet Throttle Plate Bush Service.This is probably the crustiest carb I've seen, ever. And I've been playing with carbs since I was about 12. My first was a REO...
-
-
hey mister replied to the thread Quadrajet Throttle Plate Bush Service.This is the newly aquired 1705 8213. I Think I will nick name it, "Krusty".
-
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.This is probably the crustiest carb I've seen, ever. And I've been playing with carbs since I was about 12. My first was a REO lawnmower...
-
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.I get them from 2 places, depending on what I need. Cliff's and The Carburetor Doctor
