gmbellew's latest activity
-
Ggmbellew replied to the thread TBI distributor 454/7.4L.https://www.summitracing.com/parts/SUM-850468
-
Ggmbellew replied to the thread TBI distributor 454/7.4L.I see COMP makes some melonized gears that are available on summit...
-
Ggmbellew replied to the thread Show your daily driver.yes, for the last 6+ yrs...at about 15k miles per year. i give it a good wash/wax spring and fall, even though some previous paint job...
-
Ggmbellew replied to the thread Show your daily driver.I Krown my 1990 burb every fall. $150 per year is cheap if it keeps it from rusting.
-
Ggmbellew replied to the thread Best tires.The thing that helps stop best on ice is a lot of distance between you and what you might hit when you apply the brakes, short of...
-
Ggmbellew replied to the thread Best tires.This is very subjective, but I have been pleased with BFG K02 for light off roading, highway, and snow. K03 are coming, and should be...
-
Ggmbellew replied to the thread Spark plug foul up.O2 voltage should be constantly varying back and forth between 0.1v and 0.9v as the computer constantly adjusts fuel. high volts is rich...
-
Ggmbellew reacted to Vbb199's post in the thread Vince's TBI woes, progressive revelations, and tbi mods. with
Like.
Man, its been running great since that. Smh What a debacle. But at least i got a lot of new parts under the hood now. -
Ggmbellew replied to the thread Np241 question.Might put it up on a lift and see if it is the T-case actually spinning the shaft or drag in the front hubs spinning the shaft, as...
-
Ggmbellew replied to the thread Vaccum issue.Doesn't the cruise control also have a vacuum switch to kill the cruise when you hit the brakes?
-
Ggmbellew replied to the thread late GMT400 interior lights wont shut off like a door is open..see if any other odd things happen to be in the circuit. Just had an issue on my 90 burb where the gauges all went dead and turning on...
-
Ggmbellew replied to the thread Help finding a short, Who's good at ELECTRICAL???..
-
Ggmbellew replied to the thread Vintage Air Gen V (5) or replace existing compressor, etc., for 1987 R20 Suburban?.make sure air blows through it before you install it. reason I stress that is I didn't do that one time and then had to tear it down and...
-
Ggmbellew replied to the thread Vintage Air Gen V (5) or replace existing compressor, etc., for 1987 R20 Suburban?.make sure the rear expansion valve isn't clogged up before you reassemble the rear system. it should be open at room temp and totally...
-
Ggmbellew replied to the thread Repeated stalling.The biggest difference between open and closed loop is feedback from the O2 sensor. You could unplug it and start and see if it stalls...
