fast 99's latest activity
-
fast 99 replied to the thread First real drive! Not tragic but not good. I think I need carb advice..Before thinking about buying parts some diagnosis first. Check over the tune up, good plugs not fouled, timing, both advances, inspect... -
Pack the wheel bearings with grease but not the locking hub parts. Heavy grease will cause Spicers to stick and not move like they...
-
fast 99 replied to the thread LMC Dash Pad Supplier.Can't remember which vendor I got mine from but it came double boxed with dashes direct part inside. It was for an 81 fit was eh.
-
I grew up in ND, and freeze plug (or block) heaters were installed on just about every carbureted vehicle. You can put it on a timer...
-
fast 99 replied to the thread Engine Block Heater for SBC 350.Good battery means adequate amperage to crank fast enough in a cold environment. Shouldn't be using heavy grade oil 10-30 or 10-40 ok...
-
fast 99 replied to the thread EGR gasket seal.needs a gasket
-
fast 99 replied to the thread Engine Block Heater for SBC 350.Most reliable and easiest to install are soft plug heaters. Directions will instruct which one to install it in. Remember GM installed...
-
fast 99 replied to the thread Brought home my first square body. 1980 Silverado C10. Utah.Am sure the shows will continue somewhere else. Broadcast media is dying a slow death. 10 years from now may not be any left. I am on...
-
fast 99 replied to the thread Little help please.If that's all you have try to buy a donor truck to rob parts from. Buying individual items will get expensive real quick.
-
fast 99 replied to the thread Brought home my first square body. 1980 Silverado C10. Utah.Unfortunately all those show will end. Motortrend TV is shutting down.
-
Looks like a bunch of the linkages on the pass side are not hooked up or missing. Might be holding things in the wrong spots and/or...
-
Good eyes. I was concentrating on the written description of symptoms. The rear vacuum break is disconnected NBD, it should be, and will...
-
fast 99 replied to the thread Ac liquid condenser line.Outlet is for rear ac. Might be able to weld it shut.
-
Should work.
-
fast 99 replied to the thread TH350 Removal.Only suggested from top because some do not have long enough extensions for the 2 top bolts.
