fast 99's latest activity
-
fast 99 replied to the thread 1985 Long Bed Floor and Bedsides.Beautiful truck and black shows everything. Already have an AMD floor. Bed sides have too many repairs [mud] to ever look good even in... -
-
Yeah and alot of the squarebody panels were junk for a long time, what we refer to as "crash parts". We reverse engineered off good...
-
fast 99 replied to the thread 1985 Long Bed Floor and Bedsides.Good to know. OEM fit would be great. Have been there done that trying to install poor reproduction parts.
-
fast 99 replied to the thread CARBURETOR DATED.Really sounds like a hot soak problem. Check fuel pressure and float setting. If that's ok try non-ethanol fuel. I have the same issue...
-
fast 99 replied to the thread 1985 Long Bed Floor and Bedsides.Let us know how the bed sides fit and quality. I will need both at a later date.
-
fast 99 replied to the thread 1973 k20 350 intermittent bogging under load.I bought 2 pumps in a row that went bad in less than 60 miles. If pump ends up being bad buy Delco, Delphi or AC.
-
fast 99 replied to the thread 1973 k20 350 intermittent bogging under load.Check fuel pressure and volume. Quite a few bad pumps out there.
-
fast 99 replied to the thread Rear axle seal questions..During disassembly for a leaky axle seal, first check for a loose bearing. Any looseness will decrease the ability to seal. If you're...
-
fast 99 replied to the thread Heavy vibration at highway speed under load.Really sounds like a driveshaft problem, balance, phasing, angles, loose bushing, ect.
-
fast 99 replied to the thread Plug Wire Retainers.I posted pictures in your other thread. Is there a pull and save close to you? Otherwise try searching the Corvette or Camaro forums...
-
fast 99 replied to the thread Spark Plug Wire Holders.Holders for that year have a lock type and I believe were for 8mm wire. They were usually white or gray but like ones pictured below...
-
-
fast 99 replied to the thread Rear axle seal questions..2081 national may fit. Seal can't be inspected during install. That's a problem with a speedy sleeve. It's more likely the outer...
-
fast 99 replied to the thread speeo gear ?.subtract think about it this way, a larger drive pully will spin a smaller pulley faster.
-
fast 99 replied to the thread 1987 V3500 Engine update.Owned 2 C30 cab/chassis 1988 and 1989 1-ton DRW 454. Both were TBI. Do remember working on customer dual air pump carbed 454's during...
-
fast 99 replied to the thread Bleeding rear brakes on 1978 C30 dually.Most of our trucks were cab and chassis. And yes, very tight. When replacing shoes, always check the bleeder before installing anything...
