fast 99's latest activity
-
fast 99 reacted to Ricko1966's post in the thread Old,doesn't mean bad New,doesn't mean works correctly. with
Like.
Had to post this, it is so common,people are changing parts without testing the old part or the new part. And changing more parts... -
To clarify, I was NOT saying to change the head gasket if it wasn't leaking from there. I was saying to have everything ready to do so...
-
fast 99 replied to the thread 327 vs 350 for a daily driver.GM discontinued small block pre Vortec crate engines.
-
350. A 350 is a stroked 327 just like a 383 is a stroked 350. More stroke equals more torque. Torque is what turns the tires.
-
You can still buy a crate 327? This is almost too generic of a question for us to answer. Everybody is different in what their goals...
-
fast 99 replied to the thread Head gasket Job.Yes, do need to verify where it is leaking first. Intake is more likely. However, do disagree on replacing the head gasket because your...
-
fast 99 replied to the thread Vacume lines.Could be a lot of things, from coolant sensor to base plate gasket, fuel supply on and on. There are inexpensive adapters that will...
-
Egr and Evap aren't just about emissions. Do some research, make up your own mind because everyone's got an opinion. My opinion...
-
Drain the oil look for "glitter" and cut the oil filter open and check for metal particles.
-
fast 99 replied to the thread Need Help with Rear Brakes..Go back to post 4. If fluid can't be pushed to the rear there is a restriction. Proceed from the front to the back breaking lines loose...
-
This makes no sense.Were you getting fluid while you were bleeding the rears?
-
fast 99 replied to the thread High temps.Really, factory gauges are indicators. Unless brakes are dragging causing the motor to work harder can't see a connection. If you want...
-
Based on the brake pedal wear, I’d say it’s 152,000. But that’s just my opinion. It could vary if it was mainly driven around town with...
-
fast 99 replied to the thread Need Help with Rear Brakes..If the lines are clear verified with air from the master to rear cylinder bleeders either the master is bad or improper bleed procedure...
-
fast 99 replied to the thread Cab Light Mount Questions.Yes, low mount mirrors also have an internal reinforcement.
