EvilGenius's latest activity
-
EvilGenius replied to the thread Scratching my head.My guess is check the condition of your battery positive wires at this point. If you've eliminated the grounds as an issue that is. The... -
For LED's, heat is the enemy, and driver boards are what fail. Anything that has a separate heat sink should last longer than something...
-
-
EvilGenius reacted to Keith Seymore's post in the thread Project is stalled. Cannot solve brake problem with
Like.
Joining late; skimmed the thread and didn't see where he admitted going from manual brakes to power brakes - but - by way of help... -
EvilGenius replied to the thread Need help with 81 c10 radiator.https://www.lmctruck.com/mechanical/cooling-system/cc-1973-87-radiator-components
-
EvilGenius replied to the thread One more electrical plug identification.That's sweet that that is available. I had no idea these were out there. The tech section on the forum has scans of the service...
-
EvilGenius reacted to 84_c10_GMC's post in the thread One more electrical plug identification with Like.
https://classiccarwiring.com/ This is where I got the colored wiring diagrams
-
EvilGenius replied to the thread Rotor/Hub 86 k10 GM Corp 10.Yeah I was confused when I first got into the front brakes on these. Knock the studs out and then use a soft blow hammer to separate the...
-
EvilGenius replied to the thread Wire identification help.The factory 12 v path is battery, then starter, then junction block, then those 2 power wires into the cab. Anything in the engine bay...
-
EvilGenius replied to the thread Wire identification help.That black wire is most likely a fusible link to protect the trucks main circuits. The main bulkhead connector has 2 main power wires...
-
EvilGenius replied to the thread Wire identification help.That black one looks like it goes on the factory junction block that you no longer have. The second Pic you have is where it would be...
-
EvilGenius replied to the thread Wire identification help.I believe that pink one is the fuel tank level sensor wire. It snaps onto a port on the sending unit on top of the tank.
-
EvilGenius replied to the thread Where to go through firewall for radio amp battery connection.You can reuse the wiring hole for the hvac wiring going from the cab to the blower motor. GM used a big grommet down to a small bundle...
-
EvilGenius reacted to Matt69olds's post in the thread Need help with my 700r4 TTC wiring harness with Like.
This is the method I used to wire the TCC on my 81 GMC. The only difference, I used a time delay relay I bought from Amazon. It was...
-
EvilGenius reacted to Jgonick's post in the thread Need help with my 700r4 TTC wiring harness with Like.
I meant to mention this earlier- I found a relay that will work - Relay RY31 around $20 at Oreilly or other part stores
Latest posts
-
Trade sm465 for gm NV4500 ? And will it withstand my 383- Latest: 1978cheynne
-
-
-