donnieray's latest activity
-
donnieray reacted to TotalyHucked's post in the thread Maxwellvis. A 20 year old with a 1949 Chevrolet truck. with
Like.
1 3/4" longtubes, 2.5" pipe with an X, Corsa "pro" small universal mufflers mounted behind the axle. It's belligerently loud lol -
donnieray reacted to 75 Chevy SWB 4x4's post in the thread Just got back into a square body with Like.
I just bought a 1975 Chevy SWB 4x4 from a good friend of mine for $3,500. He just put brand-new 35x12.5R15 Mastercraft Courser tires on...
-
To help support the weight of having the transfer case behind the transmission.
-
As for your flexplate cover,a 4x4 cover is cast and has bosses for braces to attach to. Your missing the braces also. At this point a...
-
My FIRST suspect would be, the ground connections (both ends) of the burned wire. Bad connections act like resistors that, if you put...
-
I bet you will find either a loose ground wire, or bad corrosion inside the insulation of the heavy ground wire. Since the main ground...
-
What does the ohm meter show exactly? There should be about 0.1 ohms of resistance with absolutely no current running through the...
-
Don't forget each place the harness grounds. The front lights ground to the core support on each side.
-
And a new one from the battery to everything.
-
you need to shore up the grounds. Heads to the firewall. frame to core support. Engine to battery. core support to battery.
-
donnieray reacted to Strick's post in the thread What have you done to your square lately?? with Like.
Drove Hillbilly Deluxe home from school today & I'm more than satisfied with the ride from the 35 Patagonia & Rough Country 6" lift...
-
donnieray reacted to 82sbshortbed's post in the thread What have you done to your square lately?? with Like.
Removed the wire i had on temporarily to keep the throttle cable from slipping off and replaced it with the correct clip. Google said...
-
Painted dash for the win!
-
The other thing to consider is that it is likely that the sway bar is binding up and greatly stiffening up your ride. The sway bar...
-
@danzey I am Very Impressed with your work and your final results. Excellent photodocumentation of the job as well. When I post my...
