donnieray's latest activity
-
donnieray replied to the thread My-6 new process 3-speed overdrive.You are very correct, my search for a shifter got me some blank stares. -
donnieray reacted to RetroC10Sport's post in the thread My-6 new process 3-speed overdrive with
Like.
The trans is so rare that if one went to a junkyard looking for it, they would be told it doesn't exist as it's not in the Hollander... -
donnieray reacted to Keith Seymore's post in the thread My-6 new process 3-speed overdrive with Like.
Correct - MY6 uses ATF. https://67-72chevytrucks.com/vboard/showthread.php?p=3662550&highlight=Pig#post3662550 ;) K
-
donnieray reacted to siataspring850's post in the thread My-6 new process 3-speed overdrive with Like.
Thank you for the information. The drive shaft was a big concern. I wont move it into the in a real garage to look it over for a few...
-
Drive shaft will work,bellhousing probably will not. Make sure your bellhousing has a bolt pattern for your new transmission.
-
donnieray reacted to siataspring850's post in the thread My-6 new process 3-speed overdrive with Like.
Thank you for all of your replies. I think it is a great truck. I am going to pull the tranny and see what is up with it. If it is a...
-
donnieray reacted to squaredeal91's post in the thread My-6 new process 3-speed overdrive with Like.
Wouldn't be a bad idea to rebuild. You definitely have a Gem. If anything keep the original around
-
donnieray replied to the thread My-6 new process 3-speed overdrive.I'll add a little here, parts are available for the transmission, the shifter is the hen's tooth. The Hurst Comp Plus shifter for the...
-
donnieray reacted to Keith Seymore's post in the thread My-6 new process 3-speed overdrive with Like.
This could be the clutch throwout bearing - which would be bad regardless of the trans used. K
-
donnieray reacted to Keith Seymore's post in the thread My-6 new process 3-speed overdrive with Like.
Yes - I would keep the MY6. It's a cool little trans, plus you get the bragging rights of having a MOPAR trans (and the cool Hurst...
-
donnieray reacted to Keith Seymore's post in the thread My-6 new process 3-speed overdrive with Like.
Not sure about this, either. Since the MY6 trans was also available in the full size Blazer it conceivably could have been had in the...
-
donnieray reacted to Keith Seymore's post in the thread My-6 new process 3-speed overdrive with Like.
Not quite what I said; I said that 100 were built under the Temporary Deviation (one of which happened to be mine). I don't know if...
-
donnieray reacted to NickTransmissions's post in the thread How many bolts hold the transmission on and where? with Like.
Not really. It's much easier to simply remove the trans, get it out of the way so the flexplate can be removed and new one installed...
-
donnieray reacted to DoubleDingo's post in the thread Advice on Transmission Fluid Change for 1980 C10 with Like.
I took an old milk jug and used a 4-cup measuring cup and a sharpie to mark 1 quart, 2 quart, 3 quart up to 4 quart using water to get...
-
donnieray reacted to Ricko1966's post in the thread Advice on Transmission Fluid Change for 1980 C10 with Like.
I wouldn't unless I was going to have a shop do a flush,or I was going to install a drain plug in the pan and change the fluid...
