Craig Nedrow's latest activity
-
Craig Nedrow reacted to Strick's post in the thread Front driveshaft - longer on a NP203 vs NP205 ? Same mount ? with
Like.
The front shaft should be the same length for an NP205 or NP203. The rear shaft will be shorter on an NP203 because the case length is... -
Craig Nedrow reacted to Bowtie-dad's post in the thread Front driveshaft - longer on a NP203 vs NP205 ? Same mount ? with Like.
This is a double cardan 1350 drive shaft from a 1ton with a 205 t case and Dana 60 front diff Tom woods can build a custom one to fit...
-
3.73 should be 41 on the ring, 11 on the pinion (ie 11:41 or 41:11 as stamped in the gear). K
-
Have the person you are talking to count the teeth on both gears. And or get us ALLL the numbers off the ring and pinion. Normal there...
-
Count the number of teeth on the ring gear and divide by the number on the pinion. That's the ratio. K
-
Craig Nedrow reacted to Snoots's post in the thread No crank. No power at all 1885gmc 2500 with Like.
WTF!? was the problem?
-
Craig Nedrow reacted to YakkoWarner's post in the thread No crank. No power at all 1885gmc 2500 with Like.
If you have no power anywhere, I'd start with the basics - put a meter on your battery and make sure you have power (yes I know you ran...
-
Hello all, While in "paint jail" paint shop lost the complete wiper motor ASSY including linkage from my 1974 C10 ! What fits ? I found...
-
Hello from New England! I'm the original owner of this 1983 K10 P/U which I custom ordered. My girlfriend was with me the day I drove...
-
Craig Nedrow replied to the thread Hello everybody!!!.She's sweet as a Georgia peach! This is the best forum out there, excellent people with lots of experience with these trucks, we are all...
-
Buon giorno. Benvenuto dall'Austria.
-
Hello everybody, I am Max from Italy. I have a 1976 K20, 350 Vi 5.7l that I am trying to restore. It an honor for me to be part of this...
-
They are probably 4.56 gears. 4.10s were also common in the 3/4 tons with the same axle, so a swap should be easy, and you may be...
-
There’s not a differnet 4 speed that is going to get you OD except like an A833 which you don’t want in a 1 ton. You want a 5 or 6 speed...
-
Sniper eh?
